ansible 剧本 ansible的管理与剧本 ansible的剧本playbook 执行剧本 简单的copy剧本 剧本的查看输出的过程 在剧本中使用自定义变量 使用内置的变量 利用template模块下发可变的变量配置 下发的变量的判断的语法 剧本的通知和下发机制 用roles来模板换剧本，可以自己组合模板 tasks的任务编排模块 执行监督的模块 roles下的自定义变量模块 roles使用copy，和scripts模块 roles中的template模块 roles的notify变动通知执行模块
首先我们安装一个ansible。
在7版本，直接用yum安装就可以
yum -y install ansible
然后清空ansible的配置文件，在里面写入自己需要管理的服务器的ip和相应的登陆密码
[root@localhost ~]# cat /etc/ansi [root@localhost ~]# cat /etc/ansible/hosts [test] web1 ansible_ssh_host=192.168.200.131 ansible_ssh_pass=mima web2 ansible_ssh_host=192.168.200.133 ansible_ssh_pass=mima [root@localhost ~]#
ansible的批量运行的脚本
[root@localhost scripts]# pwd
/server/scripts
[root@localhost scripts]# vim auto_nginx.sh
#!/bin/bash dir=/media/cdrom anzhuang=/server/scripts [ -d $dir ] || mkdir -p $dir umount /dev/sr0 mount /dev/sr0 $dir &>/dev/null yum -y install gcc gcc-c++ make pcre pcre-devel zlib zlib-devel openssl openssl-devel &>/dev/null [ -d $anzhuang ] || mkdir -p $anzhuang cd /server/scripts/ tar xf nginx-1.10.2.tar.gz -C /usr/src/ cd /usr/src/nginx-1.10.2/ ./configure --prefix=/usr/local/nginx --with-http_ssl_module --with-http_stub_status_module &>/dev/null make &>/dev/null make install &>/dev/null
exit 0
写分发脚本
[root@localhost scripts]# vim fenfa.sh
#!/bin/bash
Group=$1
dir=/server/scripts/
ansible $Group -m shell -a "mkdir -p $dir"
ansible $Group -m copy -a "src=$dir dest=$dir"
ansible $Group -m script -a "/server/scripts/auto_nginx.sh"
然后激活脚本
[root@localhost scripts]# sh fenfa.sh all
如果copy报错一下的语句
"msg": "Aborting, target uses selinux but python bindings (libselinux-python) aren't installed!"
需要在备分发的服务器上安装支持包
[root@www ~]# mount /dev/sr0 /media/cdrom/ mount: block device /dev/sr0 is write-protected, mounting read-only [root@www ~]# yum -y install libselinux-python
ansible的剧本playbook
[root@ansible scripts]# cat test_shell.yaml #playbook的执行模板
--- #开头三个小-开头
- hosts: webB
tasks:
- name: test
shell: echo "welcome to yunjisaun" >> /tmp/username
- name: test2
shell: echo "welcome to yunjisuan" >> /tmp/username
模板说明：
--- #开头必须有三个小-，顶格写
- hosts： #正文配置代码的第一级，必须有两个空格（-占一个空格位）
- host: webB #webB是host参数的值，值和hosts：之间要有一个空格
tasks: #tasks：表示接下来要执行的具体任务
- name: #相对于tasks再多缩进两个格（-占一个空格位），表示属于tasks的下一级
- name: test #test只是要执行的具体命令的名字可以随便写。name:后还是有一个空格要注意
shell: #表示调用shell模块执行命令相对于tasks仍旧要多缩进两个空格
shell: echo "xxx" >> xxx #shell:后边还是要有个空格，需要注意。
执行剧本
[root@ansible scripts]# ansible-playbook test_shell.yaml #执行playbook配置文件 PLAY [webB] ******************************************************************************************************** TASK [Gathering Facts] ********************************************************************************************* ok: [webB] TASK [test] ******************************************************************************************************** changed: [webB] TASK [test2] ******************************************************************************************************* changed: [webB] PLAY RECAP ********************************************************************************************************* webB : ok=3 changed=2 unreachable=0 failed=0
简单的copy剧本
[root@ansible scripts]# echo "welcom to yunjisuan" >> /tmp/test_copy
[root@ansible scripts]# cat test_copy.yaml
---
- hosts: all
tasks:
- name: test copy
copy: src=/tmp/copy_test dest=/tmp/
[root@ansible scripts]# ansible-playbook /service/scripts/test_copy.yaml
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [test copy] ***************************************************************************************************
changed: [webA]
changed: [webB]
PLAY RECAP *********************************************************************************************************
webA : ok=2 changed=1 unreachable=0 failed=0
webB : ok=2 changed=1 unreachable=0 failed=0
剧本的查看输出的过程
我们在用playbook进行ansible模块操作的时候，并没有命令的执行结果输出，默认被隐藏了。
我们可以通过register模块最加输出命令的执行结果
[root@ansible scripts]# cat test_register.yaml
---
- hosts: all
tasks:
- name: test register
shell: echo "welcome to yunjisuan"
register: print_result #将之前命令的输出结果保存在变量print_result里
- debug: var=print_result #将变量的值作为debug输出出来。
[root@ansible scripts]# ansible-playbook test_register.yaml
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [test register] ***********************************************************************************************
changed: [webA]
changed: [webB]
TASK [debug] *******************************************************************************************************
ok: [webA] => { #命令的执行结果有输出了
"print_result": {
"changed": true,
"cmd": "echo "welcome to yunjisuan"",
"delta": "0:00:00.002269",
"end": "2018-06-15 10:28:14.693883",
"failed": false,
"rc": 0,
"start": "2018-06-15 10:28:14.691614",
"stderr": "",
"stderr_lines": [],
"stdout": "welcome to yunjisuan",
"stdout_lines": [
"welcome to yunjisuan"
]
}
}
ok: [webB] => {
"print_result": {
"changed": true,
"cmd": "echo "welcome to yunjisuan"",
"delta": "0:00:00.002633",
"end": "2018-06-15 10:28:14.710242",
"failed": false,
"rc": 0,
"start": "2018-06-15 10:28:14.707609",
"stderr": "",
"stderr_lines": [],
"stdout": "welcome to yunjisuan",
"stdout_lines": [
"welcome to yunjisuan"
]
}
}
PLAY RECAP *********************************************************************************************************
webA : ok=3 changed=1 unreachable=0 failed=0
webB : ok=3 changed=1 unreachable=0 failed=0
配置文件下发的简单剧本
[root@ansible scripts]# cat test_nginx_conf.yaml
---
- hosts: all
tasks:
- name: copy nginx.conf
copy: src=/tmp/nginx.conf dest=/usr/local/nginx/conf/ backup=yes
- name:
shell: /usr/local/nginx/sbin/nginx -t
register: nginx_result
- debug: var=nginx_result
在剧本中使用自定义变量
[root@localhost scripts]# cat test_vars.yaml
---
- hosts: all
vars: #定义变量
- name: "yunjisuan" #第一个name变量
age: "3" #第二个age变量
tasks:
- name: "{{ name }}" #{{}}两对大括号引用变量，变量名两头空格
shell: echo "myname {{ name }},myage {{ age }}"
register: var_result
- debug: var=var_result
特别提示：
引用变量需要在双引号中引用。
[root@localhost scripts]# ansible-playbook /service/scripts/test_vars.yaml
[WARNING]: Found variable using reserved name: name #这里提示，name是一个保留的内置变量，我们在自定义时不能用
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [yunjisuan] ***************************************************************************************************
changed: [webA]
changed: [webB]
TASK [debug] *******************************************************************************************************
ok: [webA] => {
"var_result": {
"changed": true,
"cmd": "echo "myname yunjisuan,myage 3"",
"delta": "0:00:00.002320",
"end": "2018-06-19 10:45:16.175728",
"failed": false,
"rc": 0,
"start": "2018-06-19 10:45:16.173408",
"stderr": "",
"stderr_lines": [],
"stdout": "myname yunjisuan,myage 3",
"stdout_lines": [
"myname yunjisuan,myage 3"
]
}
}
ok: [webB] => {
"var_result": {
"changed": true,
"cmd": "echo "myname yunjisuan,myage 3"",
"delta": "0:00:00.002518",
"end": "2018-06-19 10:45:10.552331",
"failed": false,
"rc": 0,
"start": "2018-06-19 10:45:10.549813",
"stderr": "",
"stderr_lines": [],
"stdout": "myname yunjisuan,myage 3",
"stdout_lines": [
"myname yunjisuan,myage 3"
]
}
}
PLAY RECAP *********************************************************************************************************
webA : ok=3 changed=1 unreachable=0 failed=0
webB : ok=3 changed=1 unreachable=0 failed=0
#我们修改一下name这个变量再发送，就不会出警告了
[root@localhost scripts]# cat test_vars.yaml
---
- hosts: all
vars:
- names: "yunjisuan"
age: "3"
tasks:
- name: "{{ names }}"
shell: echo "myname {{ names }},myage {{ age }}"
register: var_result
- debug: var=var_result
在使用自定义变量时，要特别注意不要和系统的内置保留变量同名，容易引发问题。
使用内置的变量
我们可以使用ansible all -m setup | less查看ansible内置变量
[root@localhost scripts]# cat test_setupvars.yaml
---
- hosts: all
gather_facts: True #使用ansible内置变量
tasks:
- name: setup var
shell: echo "ip {{ ansible_all_ipv4_addresses[0] }} cpu {{ ansible_processor_count }}"
register: var_result
- debug: var=var_result
[root@localhost scripts]#
[root@localhost scripts]# ansible-playbook test_setupvars.yaml
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [setup var] ***************************************************************************************************
changed: [webA]
changed: [webB]
TASK [debug] *******************************************************************************************************
ok: [webA] => {
"var_result": {
"changed": true,
"cmd": "echo "ip 192.168.200.132 cpu 1"",
"delta": "0:00:00.002408",
"end": "2018-06-19 11:32:44.540658",
"failed": false,
"rc": 0,
"start": "2018-06-19 11:32:44.538250",
"stderr": "",
"stderr_lines": [],
"stdout": "ip 192.168.200.132 cpu 1",
"stdout_lines": [
"ip 192.168.200.132 cpu 1"
]
}
}
ok: [webB] => {
"var_result": {
"changed": true,
"cmd": "echo "ip 192.168.200.138 cpu 1"",
"delta": "0:00:00.002102",
"end": "2018-06-19 11:32:44.526875",
"failed": false,
"rc": 0,
"start": "2018-06-19 11:32:44.524773",
"stderr": "",
"stderr_lines": [],
"stdout": "ip 192.168.200.138 cpu 1",
"stdout_lines": [
"ip 192.168.200.138 cpu 1"
]
}
}
PLAY RECAP *********************************************************************************************************
webA : ok=3 changed=1 unreachable=0 failed=0
webB : ok=3 changed=1 unreachable=0 failed=0
去内置变量的操作
[root@localhost scripts]# cat test_setupvars.yaml
---
- hosts: all
gather_facts: True
tasks:
- name: setup var
shell: echo "ip {{ ansible_all_ipv4_addresses[0] }} cpu {{ ansible_processor_count }}" >> /tmp/test
- name: setup var2
shell: echo "time {{ ansible_date_time["date"] }}" >> /tmp/test
register: var_result
- debug: var=var_result
利用template模块下发可变的变量配置
[root@localhost scripts]# cat /tmp/test
my name is {{ myname }} #自定义变量
my name is {{ ansible_all_ipv4_addresses[0] }} #系统变量
[root@localhost scripts]# cat test_filevars.yaml
---
- hosts: all
gather_facts: True #开启系统变量
vars:
- myname: "yunjisuan" #自定义变量
tasks:
- name: template test
template: src=/tmp/test dest=/root/test #使用template下发可变配置文件
[root@localhost scripts]# ansible-playbook test_filevars.yaml
下发的变量的判断的语法
[root@localhost scripts]# cat /tmp/if.j2
{% if PORT %} #if PORT存在
ip=0.0.0.0:{{ PORT }}
{% else %} #否则的话
ip=0.0.0.0:80
{% endif %} #结尾
[root@localhost scripts]# cat test_ifvars.yaml
---
- hosts: all
gather_facts: True #开启系统内置变量
vars:
- PORT: 90 #自定义变量
tasks:
- name: jinja2 if test
template: src=/tmp/if.j2 dest=/root/test
[root@localhost scripts]# ansible-playbook test_ifvars.yaml
如果我们把PROT的值置空就会是假
[root@localhost scripts]# cat test_ifvars.yaml
---
- hosts: all
gather_facts: True
vars:
- PORT: #置空
tasks:
- name: jinja2 if test
template: src=/tmp/if.j2 dest=/root/test
[root@localhost scripts]# ansible-playbook test_ifvars.yaml
剧本的通知和下发机制
#下发可执行动作的可变的nginx配置文件
[root@localhost scripts]# head -1 /tmp/nginx.j2
worker_processes {{ ansible_processor_count }}; #可变的参数
[root@localhost scripts]# cat test_nginxvars.yaml
---
- hosts: all
gather_facts: True #开启系统内置变量
tasks:
- name: nginx conf
template: src=/tmp/nginx.j2 dest=/usr/local/nginx/conf/nginx.conf
notify:
- reload nginx #下发通知给handlers模块执行名字叫做reload nginx的动作
handlers: #定义动作
- name: reload nginx #动作的名字
shell: /usr/local/nginx/sbin/nginx -s reload
[root@localhost scripts]# ansible-playbook test_nginxvars.yaml
用roles来模板换剧本，可以自己组合模板
#创建roles基本原型的目录结构
[root@ansible myroles]# tree /myroles/
/myroles/
├── nginx.yaml #入口触发配置文件
└── roles #playbook的原型配置目录
└── nginx #nginx相关模组配置目录
├── files #copy模块和script模块的参数src默认会从这个文件夹查找
├── handlers #用来存放notify的
├── tasks #用来存放ansible模块任务的
├── templates #用来存放j2的
└── vars #用来存放变量的
7 directories, 1 file
#入口触发配置文件
[root@ansible myroles]# cat /myroles/nginx.yaml
---
- hosts: all #执行的主机范围
gather_facts: True #开启系统内置变量
roles: #启用roles原型配置
- nginx #执行nginx原型模组
tasks的任务编排模块
#在nginx模组添加tasks任务配置文件
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived #任务1的名字
ping: #执行ping模块
- name: #任务2的名字
shell: ls / #执行shell模块
register: ls_result #将执行结果保存给变量
- debug: var=ls_result #变量的值赋值给debug进行输出
#完成后的目录结构如下所示
[root@ansible myroles]# tree /myroles/
/myroles/
├── nginx.yaml #nginx模组入口配置文件
└── roles
└── nginx #nginx原型模组目录
├── files
├── handlers
├── tasks
│ └── main.yaml #nginx模组的tasks任务配置文件
├── templates
└── vars
7 directories, 2 files
执行监督的模块
[root@ansible myroles]# ansible-playbook nginx.yaml
PLAY [all] ****************************************************************************************************
TASK [Gathering Facts] ****************************************************************************************
ok: [webA]
ok: [webB]
TASK [nginx : check alived] ***********************************************************************************
ok: [webA]
ok: [webB]
TASK [nginx : shell] ******************************************************************************************
changed: [webA]
changed: [webB]
TASK [nginx : debug] ******************************************************************************************
ok: [webA] => {
"ls_result": {
"changed": true,
"cmd": "ls /",
"delta": "0:00:00.002805",
"end": "2018-06-21 11:52:29.343592",
"failed": false,
"rc": 0,
"start": "2018-06-21 11:52:29.340787",
"stderr": "",
"stderr_lines": [],
"stdout": "bin
boot
dev
etc
home
lib
lib64
media
mnt
opt
proc
roo
root
run
sbin
service
srv
sys
tmp
usr
var",
"stdout_lines": [
"bin",
"boot",
"dev",
"etc",
"home",
"lib",
"lib64",
"media",
"mnt",
"opt",
"proc",
"roo",
"root",
"run",
"sbin",
"service",
"srv",
"sys",
"tmp",
"usr",
"var"
]
}
}
ok: [webB] => {
"ls_result": {
"changed": true,
"cmd": "ls /",
"delta": "0:00:00.002708",
"end": "2018-06-21 11:52:29.359754",
"failed": false,
"rc": 0,
"start": "2018-06-21 11:52:29.357046",
"stderr": "",
"stderr_lines": [],
"stdout": "bin
boot
dev
etc
home
lib
lib64
media
mnt
opt
proc
roo
root
run
sbin
service
srv
sys
tmp
usr
var",
"stdout_lines": [
"bin",
"boot",
"dev",
"etc",
"home",
"lib",
"lib64",
"media",
"mnt",
"opt",
"proc",
"roo",
"root",
"run",
"sbin",
"service",
"srv",
"sys",
"tmp",
"usr",
"var"
]
}
}
PLAY RECAP ****************************************************************************************************
webA : ok=4 changed=1 unreachable=0 failed=0
webB : ok=4 changed=1 unreachable=0 failed=0
ansible-playbook执行入口配置文件nginx.yaml后，它会自动在roles目录下查找nginx目录并进入后查找tasks任务目录并执行main.yaml的任务配置文件。 其实，这个roles的操作等效于以下配置
#本配置和之前的roles配置等效
[root@ansible myroles]# cat /service/scripts/test.yaml
---
- hosts: all
gather_facts: True
tasks: #其实roles的本质就是将tasks任务单独写了。
- name: check alived #并在入口文件里追加了roles去查找tasks配置文件路径
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
roles下的自定义变量模块
#创建自定义变量vars模组的配置文件
[root@ansible myroles]# cat roles/nginx/vars/main.yaml
---
my_name: yunjisuan
phone: 1800000000
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name: #添加对变量引用的任务编排
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
[root@ansible myroles]# ansible-playbook nginx.yaml #执行入口配置文件
roles使用copy，和scripts模块
[root@ansible myroles]# cat roles/nginx/files/test
welcome to yunjisuan
[root@ansible myroles]# cat roles/nginx/files/test.sh
echo "aaa" >> /tmp/test
[root@ansible myroles]# chmod +x roles/nginx/files/test.sh
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name:
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
- name: #添加copy模块
copy: src=test dest=/root/
- name: #添加script模块（自动在目标IP机器上执行脚本）
script: test.sh
[root@ansible myroles]# ansible-playbook nginx.yaml
roles中的template模块
[root@ansible myroles]# cat roles/nginx/templates/test.j2
myname is {{ my_name }},my phone is {{ phone }} #引用自定义变量
my ipaddress is {{ansible_all_ipv4_addresses[0]}} #引用内置变量
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name:
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
- name:
copy: src=test dest=/root/
- name:
script: test.sh
- name:
template: src=test.j2 dest=/root/test2 #下发可变配置文件
[root@ansible myroles]# ansible-playbook nginx.yaml
roles的notify变动通知执行模块
[root@ansible myroles]# cat roles/nginx/handlers/main.yaml
---
- name: start_nginx #定义handlers的动作类型
shell: /usr/local/nginx/sbin/nginx
- name: stop_nginx #定义handlers的动作类型
shell: /usr/local/nginx/sbin/nginx -s stop
- name: reload_nginx #定义handlers的动作类型
shell: /usr/local/nginx/sbin/nginx -s reload
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name:
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
- name:
copy: src=test dest=/root/
- name:
script: test.sh
- name:
template: src=test.j2 dest=/root/test2
notify: start_nginx #执行template任务后下发通知给handlers执行start_nginx
[root@ansible myroles]# ansible-playbook nginx.yaml
特别提示：
notify下发通知只有当之前的任务造成了变化那么才会被执行，如果没有发生任何改变，则notify不会被执行。例如：
#tasks任务造成改变，触发notify
[root@ansible myroles]# cat /tmp/test.yaml
---
- hosts: webA
gather_facts: True
tasks:
- name:
copy: src=/tmp/test dest=/root/ #这步造成目标改变才能出发notify
notify: start_nginx
handlers:
- name: start_nginx
shell: /usr/local/nginx/sbin/nginx
[root@ansible myroles]# ansible-playbook /tmp/test.yaml
PLAY [webA] ***************************************************************************************************
TASK [Gathering Facts] ****************************************************************************************
ok: [webA]
TASK [copy] ***************************************************************************************************
changed: [webA] #发生了改变
RUNNING HANDLER [start_nginx] #触发notify *********************************************************************************
changed: [webA]
PLAY RECAP ****************************************************************************************************
webA : ok=3 changed=2 unreachable=0 failed=0
#我们再次执行/tmp/test.yaml
[root@ansible myroles]# ansible-playbook /tmp/test.yaml
PLAY [webA] ***************************************************************************************************
TASK [Gathering Facts] ****************************************************************************************
ok: [webA]
TASK [copy] ***************************************************************************************************
ok: [webA] #没有造成任务改变，未触发notify通知
PLAY RECAP ****************************************************************************************************
webA : ok=2 changed=0 unreachable=0 failed=0
首先我们安装一个ansible。
在7版本，直接用yum安装就可以
yum -y install ansible
然后清空ansible的配置文件，在里面写入自己需要管理的服务器的ip和相应的登陆密码
[root@localhost ~]# cat /etc/ansi [root@localhost ~]# cat /etc/ansible/hosts [test] web1 ansible_ssh_host=192.168.200.131 ansible_ssh_pass=mima web2 ansible_ssh_host=192.168.200.133 ansible_ssh_pass=mima [root@localhost ~]#
ansible的批量运行的脚本
[root@localhost scripts]# pwd
/server/scripts
[root@localhost scripts]# vim auto_nginx.sh
#!/bin/bash dir=/media/cdrom anzhuang=/server/scripts [ -d $dir ] || mkdir -p $dir umount /dev/sr0 mount /dev/sr0 $dir &>/dev/null yum -y install gcc gcc-c++ make pcre pcre-devel zlib zlib-devel openssl openssl-devel &>/dev/null [ -d $anzhuang ] || mkdir -p $anzhuang cd /server/scripts/ tar xf nginx-1.10.2.tar.gz -C /usr/src/ cd /usr/src/nginx-1.10.2/ ./configure --prefix=/usr/local/nginx --with-http_ssl_module --with-http_stub_status_module &>/dev/null make &>/dev/null make install &>/dev/null
exit 0
写分发脚本
[root@localhost scripts]# vim fenfa.sh
#!/bin/bash
Group=$1
dir=/server/scripts/
ansible $Group -m shell -a "mkdir -p $dir"
ansible $Group -m copy -a "src=$dir dest=$dir"
ansible $Group -m script -a "/server/scripts/auto_nginx.sh"
然后激活脚本
[root@localhost scripts]# sh fenfa.sh all
如果copy报错一下的语句
"msg": "Aborting, target uses selinux but python bindings (libselinux-python) aren't installed!"
需要在备分发的服务器上安装支持包
[root@www ~]# mount /dev/sr0 /media/cdrom/ mount: block device /dev/sr0 is write-protected, mounting read-only [root@www ~]# yum -y install libselinux-python
ansible的剧本playbook
[root@ansible scripts]# cat test_shell.yaml #playbook的执行模板
--- #开头三个小-开头
- hosts: webB
tasks:
- name: test
shell: echo "welcome to yunjisaun" >> /tmp/username
- name: test2
shell: echo "welcome to yunjisuan" >> /tmp/username
模板说明：
--- #开头必须有三个小-，顶格写
- hosts： #正文配置代码的第一级，必须有两个空格（-占一个空格位）
- host: webB #webB是host参数的值，值和hosts：之间要有一个空格
tasks: #tasks：表示接下来要执行的具体任务
- name: #相对于tasks再多缩进两个格（-占一个空格位），表示属于tasks的下一级
- name: test #test只是要执行的具体命令的名字可以随便写。name:后还是有一个空格要注意
shell: #表示调用shell模块执行命令相对于tasks仍旧要多缩进两个空格
shell: echo "xxx" >> xxx #shell:后边还是要有个空格，需要注意。
执行剧本
[root@ansible scripts]# ansible-playbook test_shell.yaml #执行playbook配置文件 PLAY [webB] ******************************************************************************************************** TASK [Gathering Facts] ********************************************************************************************* ok: [webB] TASK [test] ******************************************************************************************************** changed: [webB] TASK [test2] ******************************************************************************************************* changed: [webB] PLAY RECAP ********************************************************************************************************* webB : ok=3 changed=2 unreachable=0 failed=0
简单的copy剧本
[root@ansible scripts]# echo "welcom to yunjisuan" >> /tmp/test_copy
[root@ansible scripts]# cat test_copy.yaml
---
- hosts: all
tasks:
- name: test copy
copy: src=/tmp/copy_test dest=/tmp/
[root@ansible scripts]# ansible-playbook /service/scripts/test_copy.yaml
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [test copy] ***************************************************************************************************
changed: [webA]
changed: [webB]
PLAY RECAP *********************************************************************************************************
webA : ok=2 changed=1 unreachable=0 failed=0
webB : ok=2 changed=1 unreachable=0 failed=0
剧本的查看输出的过程
我们在用playbook进行ansible模块操作的时候，并没有命令的执行结果输出，默认被隐藏了。
我们可以通过register模块最加输出命令的执行结果
[root@ansible scripts]# cat test_register.yaml
---
- hosts: all
tasks:
- name: test register
shell: echo "welcome to yunjisuan"
register: print_result #将之前命令的输出结果保存在变量print_result里
- debug: var=print_result #将变量的值作为debug输出出来。
[root@ansible scripts]# ansible-playbook test_register.yaml
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [test register] ***********************************************************************************************
changed: [webA]
changed: [webB]
TASK [debug] *******************************************************************************************************
ok: [webA] => { #命令的执行结果有输出了
"print_result": {
"changed": true,
"cmd": "echo "welcome to yunjisuan"",
"delta": "0:00:00.002269",
"end": "2018-06-15 10:28:14.693883",
"failed": false,
"rc": 0,
"start": "2018-06-15 10:28:14.691614",
"stderr": "",
"stderr_lines": [],
"stdout": "welcome to yunjisuan",
"stdout_lines": [
"welcome to yunjisuan"
]
}
}
ok: [webB] => {
"print_result": {
"changed": true,
"cmd": "echo "welcome to yunjisuan"",
"delta": "0:00:00.002633",
"end": "2018-06-15 10:28:14.710242",
"failed": false,
"rc": 0,
"start": "2018-06-15 10:28:14.707609",
"stderr": "",
"stderr_lines": [],
"stdout": "welcome to yunjisuan",
"stdout_lines": [
"welcome to yunjisuan"
]
}
}
PLAY RECAP *********************************************************************************************************
webA : ok=3 changed=1 unreachable=0 failed=0
webB : ok=3 changed=1 unreachable=0 failed=0
配置文件下发的简单剧本
[root@ansible scripts]# cat test_nginx_conf.yaml
---
- hosts: all
tasks:
- name: copy nginx.conf
copy: src=/tmp/nginx.conf dest=/usr/local/nginx/conf/ backup=yes
- name:
shell: /usr/local/nginx/sbin/nginx -t
register: nginx_result
- debug: var=nginx_result
在剧本中使用自定义变量
[root@localhost scripts]# cat test_vars.yaml
---
- hosts: all
vars: #定义变量
- name: "yunjisuan" #第一个name变量
age: "3" #第二个age变量
tasks:
- name: "{{ name }}" #{{}}两对大括号引用变量，变量名两头空格
shell: echo "myname {{ name }},myage {{ age }}"
register: var_result
- debug: var=var_result
特别提示：
引用变量需要在双引号中引用。
[root@localhost scripts]# ansible-playbook /service/scripts/test_vars.yaml
[WARNING]: Found variable using reserved name: name #这里提示，name是一个保留的内置变量，我们在自定义时不能用
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [yunjisuan] ***************************************************************************************************
changed: [webA]
changed: [webB]
TASK [debug] *******************************************************************************************************
ok: [webA] => {
"var_result": {
"changed": true,
"cmd": "echo "myname yunjisuan,myage 3"",
"delta": "0:00:00.002320",
"end": "2018-06-19 10:45:16.175728",
"failed": false,
"rc": 0,
"start": "2018-06-19 10:45:16.173408",
"stderr": "",
"stderr_lines": [],
"stdout": "myname yunjisuan,myage 3",
"stdout_lines": [
"myname yunjisuan,myage 3"
]
}
}
ok: [webB] => {
"var_result": {
"changed": true,
"cmd": "echo "myname yunjisuan,myage 3"",
"delta": "0:00:00.002518",
"end": "2018-06-19 10:45:10.552331",
"failed": false,
"rc": 0,
"start": "2018-06-19 10:45:10.549813",
"stderr": "",
"stderr_lines": [],
"stdout": "myname yunjisuan,myage 3",
"stdout_lines": [
"myname yunjisuan,myage 3"
]
}
}
PLAY RECAP *********************************************************************************************************
webA : ok=3 changed=1 unreachable=0 failed=0
webB : ok=3 changed=1 unreachable=0 failed=0
#我们修改一下name这个变量再发送，就不会出警告了
[root@localhost scripts]# cat test_vars.yaml
---
- hosts: all
vars:
- names: "yunjisuan"
age: "3"
tasks:
- name: "{{ names }}"
shell: echo "myname {{ names }},myage {{ age }}"
register: var_result
- debug: var=var_result
在使用自定义变量时，要特别注意不要和系统的内置保留变量同名，容易引发问题。
使用内置的变量
我们可以使用ansible all -m setup | less查看ansible内置变量
[root@localhost scripts]# cat test_setupvars.yaml
---
- hosts: all
gather_facts: True #使用ansible内置变量
tasks:
- name: setup var
shell: echo "ip {{ ansible_all_ipv4_addresses[0] }} cpu {{ ansible_processor_count }}"
register: var_result
- debug: var=var_result
[root@localhost scripts]#
[root@localhost scripts]# ansible-playbook test_setupvars.yaml
PLAY [all] *********************************************************************************************************
TASK [Gathering Facts] *********************************************************************************************
ok: [webA]
ok: [webB]
TASK [setup var] ***************************************************************************************************
changed: [webA]
changed: [webB]
TASK [debug] *******************************************************************************************************
ok: [webA] => {
"var_result": {
"changed": true,
"cmd": "echo "ip 192.168.200.132 cpu 1"",
"delta": "0:00:00.002408",
"end": "2018-06-19 11:32:44.540658",
"failed": false,
"rc": 0,
"start": "2018-06-19 11:32:44.538250",
"stderr": "",
"stderr_lines": [],
"stdout": "ip 192.168.200.132 cpu 1",
"stdout_lines": [
"ip 192.168.200.132 cpu 1"
]
}
}
ok: [webB] => {
"var_result": {
"changed": true,
"cmd": "echo "ip 192.168.200.138 cpu 1"",
"delta": "0:00:00.002102",
"end": "2018-06-19 11:32:44.526875",
"failed": false,
"rc": 0,
"start": "2018-06-19 11:32:44.524773",
"stderr": "",
"stderr_lines": [],
"stdout": "ip 192.168.200.138 cpu 1",
"stdout_lines": [
"ip 192.168.200.138 cpu 1"
]
}
}
PLAY RECAP *********************************************************************************************************
webA : ok=3 changed=1 unreachable=0 failed=0
webB : ok=3 changed=1 unreachable=0 failed=0
去内置变量的操作
[root@localhost scripts]# cat test_setupvars.yaml
---
- hosts: all
gather_facts: True
tasks:
- name: setup var
shell: echo "ip {{ ansible_all_ipv4_addresses[0] }} cpu {{ ansible_processor_count }}" >> /tmp/test
- name: setup var2
shell: echo "time {{ ansible_date_time["date"] }}" >> /tmp/test
register: var_result
- debug: var=var_result
利用template模块下发可变的变量配置
[root@localhost scripts]# cat /tmp/test
my name is {{ myname }} #自定义变量
my name is {{ ansible_all_ipv4_addresses[0] }} #系统变量
[root@localhost scripts]# cat test_filevars.yaml
---
- hosts: all
gather_facts: True #开启系统变量
vars:
- myname: "yunjisuan" #自定义变量
tasks:
- name: template test
template: src=/tmp/test dest=/root/test #使用template下发可变配置文件
[root@localhost scripts]# ansible-playbook test_filevars.yaml
下发的变量的判断的语法
[root@localhost scripts]# cat /tmp/if.j2
{% if PORT %} #if PORT存在
ip=0.0.0.0:{{ PORT }}
{% else %} #否则的话
ip=0.0.0.0:80
{% endif %} #结尾
[root@localhost scripts]# cat test_ifvars.yaml
---
- hosts: all
gather_facts: True #开启系统内置变量
vars:
- PORT: 90 #自定义变量
tasks:
- name: jinja2 if test
template: src=/tmp/if.j2 dest=/root/test
[root@localhost scripts]# ansible-playbook test_ifvars.yaml
如果我们把PROT的值置空就会是假
[root@localhost scripts]# cat test_ifvars.yaml
---
- hosts: all
gather_facts: True
vars:
- PORT: #置空
tasks:
- name: jinja2 if test
template: src=/tmp/if.j2 dest=/root/test
[root@localhost scripts]# ansible-playbook test_ifvars.yaml
剧本的通知和下发机制
#下发可执行动作的可变的nginx配置文件
[root@localhost scripts]# head -1 /tmp/nginx.j2
worker_processes {{ ansible_processor_count }}; #可变的参数
[root@localhost scripts]# cat test_nginxvars.yaml
---
- hosts: all
gather_facts: True #开启系统内置变量
tasks:
- name: nginx conf
template: src=/tmp/nginx.j2 dest=/usr/local/nginx/conf/nginx.conf
notify:
- reload nginx #下发通知给handlers模块执行名字叫做reload nginx的动作
handlers: #定义动作
- name: reload nginx #动作的名字
shell: /usr/local/nginx/sbin/nginx -s reload
[root@localhost scripts]# ansible-playbook test_nginxvars.yaml
用roles来模板换剧本，可以自己组合模板
#创建roles基本原型的目录结构
[root@ansible myroles]# tree /myroles/
/myroles/
├── nginx.yaml #入口触发配置文件
└── roles #playbook的原型配置目录
└── nginx #nginx相关模组配置目录
├── files #copy模块和script模块的参数src默认会从这个文件夹查找
├── handlers #用来存放notify的
├── tasks #用来存放ansible模块任务的
├── templates #用来存放j2的
└── vars #用来存放变量的
7 directories, 1 file
#入口触发配置文件
[root@ansible myroles]# cat /myroles/nginx.yaml
---
- hosts: all #执行的主机范围
gather_facts: True #开启系统内置变量
roles: #启用roles原型配置
- nginx #执行nginx原型模组
tasks的任务编排模块
#在nginx模组添加tasks任务配置文件
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived #任务1的名字
ping: #执行ping模块
- name: #任务2的名字
shell: ls / #执行shell模块
register: ls_result #将执行结果保存给变量
- debug: var=ls_result #变量的值赋值给debug进行输出
#完成后的目录结构如下所示
[root@ansible myroles]# tree /myroles/
/myroles/
├── nginx.yaml #nginx模组入口配置文件
└── roles
└── nginx #nginx原型模组目录
├── files
├── handlers
├── tasks
│ └── main.yaml #nginx模组的tasks任务配置文件
├── templates
└── vars
7 directories, 2 files
执行监督的模块
[root@ansible myroles]# ansible-playbook nginx.yaml
PLAY [all] ****************************************************************************************************
TASK [Gathering Facts] ****************************************************************************************
ok: [webA]
ok: [webB]
TASK [nginx : check alived] ***********************************************************************************
ok: [webA]
ok: [webB]
TASK [nginx : shell] ******************************************************************************************
changed: [webA]
changed: [webB]
TASK [nginx : debug] ******************************************************************************************
ok: [webA] => {
"ls_result": {
"changed": true,
"cmd": "ls /",
"delta": "0:00:00.002805",
"end": "2018-06-21 11:52:29.343592",
"failed": false,
"rc": 0,
"start": "2018-06-21 11:52:29.340787",
"stderr": "",
"stderr_lines": [],
"stdout": "bin
boot
dev
etc
home
lib
lib64
media
mnt
opt
proc
roo
root
run
sbin
service
srv
sys
tmp
usr
var",
"stdout_lines": [
"bin",
"boot",
"dev",
"etc",
"home",
"lib",
"lib64",
"media",
"mnt",
"opt",
"proc",
"roo",
"root",
"run",
"sbin",
"service",
"srv",
"sys",
"tmp",
"usr",
"var"
]
}
}
ok: [webB] => {
"ls_result": {
"changed": true,
"cmd": "ls /",
"delta": "0:00:00.002708",
"end": "2018-06-21 11:52:29.359754",
"failed": false,
"rc": 0,
"start": "2018-06-21 11:52:29.357046",
"stderr": "",
"stderr_lines": [],
"stdout": "bin
boot
dev
etc
home
lib
lib64
media
mnt
opt
proc
roo
root
run
sbin
service
srv
sys
tmp
usr
var",
"stdout_lines": [
"bin",
"boot",
"dev",
"etc",
"home",
"lib",
"lib64",
"media",
"mnt",
"opt",
"proc",
"roo",
"root",
"run",
"sbin",
"service",
"srv",
"sys",
"tmp",
"usr",
"var"
]
}
}
PLAY RECAP ****************************************************************************************************
webA : ok=4 changed=1 unreachable=0 failed=0
webB : ok=4 changed=1 unreachable=0 failed=0
ansible-playbook执行入口配置文件nginx.yaml后，它会自动在roles目录下查找nginx目录并进入后查找tasks任务目录并执行main.yaml的任务配置文件。 其实，这个roles的操作等效于以下配置
#本配置和之前的roles配置等效
[root@ansible myroles]# cat /service/scripts/test.yaml
---
- hosts: all
gather_facts: True
tasks: #其实roles的本质就是将tasks任务单独写了。
- name: check alived #并在入口文件里追加了roles去查找tasks配置文件路径
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
roles下的自定义变量模块
#创建自定义变量vars模组的配置文件
[root@ansible myroles]# cat roles/nginx/vars/main.yaml
---
my_name: yunjisuan
phone: 1800000000
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name: #添加对变量引用的任务编排
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
[root@ansible myroles]# ansible-playbook nginx.yaml #执行入口配置文件
roles使用copy，和scripts模块
[root@ansible myroles]# cat roles/nginx/files/test
welcome to yunjisuan
[root@ansible myroles]# cat roles/nginx/files/test.sh
echo "aaa" >> /tmp/test
[root@ansible myroles]# chmod +x roles/nginx/files/test.sh
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name:
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
- name: #添加copy模块
copy: src=test dest=/root/
- name: #添加script模块（自动在目标IP机器上执行脚本）
script: test.sh
[root@ansible myroles]# ansible-playbook nginx.yaml
roles中的template模块
[root@ansible myroles]# cat roles/nginx/templates/test.j2
myname is {{ my_name }},my phone is {{ phone }} #引用自定义变量
my ipaddress is {{ansible_all_ipv4_addresses[0]}} #引用内置变量
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name:
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
- name:
copy: src=test dest=/root/
- name:
script: test.sh
- name:
template: src=test.j2 dest=/root/test2 #下发可变配置文件
[root@ansible myroles]# ansible-playbook nginx.yaml
roles的notify变动通知执行模块
[root@ansible myroles]# cat roles/nginx/handlers/main.yaml
---
- name: start_nginx #定义handlers的动作类型
shell: /usr/local/nginx/sbin/nginx
- name: stop_nginx #定义handlers的动作类型
shell: /usr/local/nginx/sbin/nginx -s stop
- name: reload_nginx #定义handlers的动作类型
shell: /usr/local/nginx/sbin/nginx -s reload
[root@ansible myroles]# cat roles/nginx/tasks/main.yaml
---
- name: check alived
ping:
- name:
shell: ls /
register: ls_result
- debug: var=ls_result
- name:
shell: echo my phone is {{ phone }}
register: echo_result
- debug: var=echo_result
- name:
copy: src=test dest=/root/
- name:
script: test.sh
- name:
template: src=test.j2 dest=/root/test2
notify: start_nginx #执行template任务后下发通知给handlers执行start_nginx
[root@ansible myroles]# ansible-playbook nginx.yaml
特别提示：
notify下发通知只有当之前的任务造成了变化那么才会被执行，如果没有发生任何改变，则notify不会被执行。例如：
#tasks任务造成改变，触发notify
[root@ansible myroles]# cat /tmp/test.yaml
---
- hosts: webA
gather_facts: True
tasks:
- name:
copy: src=/tmp/test dest=/root/ #这步造成目标改变才能出发notify
notify: start_nginx
handlers:
- name: start_nginx
shell: /usr/local/nginx/sbin/nginx
[root@ansible myroles]# ansible-playbook /tmp/test.yaml
PLAY [webA] ***************************************************************************************************
TASK [Gathering Facts] ****************************************************************************************
ok: [webA]
TASK [copy] ***************************************************************************************************
changed: [webA] #发生了改变
RUNNING HANDLER [start_nginx] #触发notify *********************************************************************************
changed: [webA]
PLAY RECAP ****************************************************************************************************
webA : ok=3 changed=2 unreachable=0 failed=0
#我们再次执行/tmp/test.yaml
[root@ansible myroles]# ansible-playbook /tmp/test.yaml
PLAY [webA] ***************************************************************************************************
TASK [Gathering Facts] ****************************************************************************************
ok: [webA]
TASK [copy] ***************************************************************************************************
ok: [webA] #没有造成任务改变，未触发notify通知
PLAY RECAP ****************************************************************************************************
webA : ok=2 changed=0 unreachable=0 failed=0