您的位置: 首页  >  IT文章  >  Python3基于PCANBasic二次开发库使用方法

Python3基于PCANBasic二次开发库使用方法

分类: IT文章 • 2025-02-08 11:45:01

一、环境搭建

1.概述

PCAN-Basic 是 PCAN-Light 的后继者，是一个简单的 PCAN 系统编程接口。 通过 PCAN-Basic Dll，可以将自己的应用程序连接到设备驱动程序和 PCAN 硬件，以与 CAN 总线进行通信。支持C、C++、Delphi、JAVA、VB、Python等语言。

2.PCAN-Basic库和驱动下载地址

https://www.peak-system.com/fileadmin/media/files/pcan-basic.zip

3.Python安装

下载地址：https://www.python.org/ftp/python/3.7.9/python-3.7.9-amd64.exe

二、PCANBasic函数方法使用

1.Initialize

初始化一个代表非即插即用 PCAN 设备的 PCAN 通道。

# The Not Plug & Play Channel (PCAN-DNG) is initialized
#
objPCAN = PCANBasic()
result = objPCAN.Initialize(PCAN_DNGBUS1, PCAN_BAUD_500K, PCAN_TYPE_DNG_SJA, 0x378, 7)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    print "PCAN-DNG (Ch-1) was initialized"

# All initialized channels are released
#
objPCAN.Uninitialize(PCAN_NONEBUS)

2.InitializeFD

初始化支持 FD 的 PCAN 通道。

# Defines a FD Bit rate string with nominal and data Bit rate set to 1 MB
#
bitrate = "f_clock_mhz=24, nom_brp=1, nom_tseg1=17, nom_tseg2=6, nom_sjw=1, data_brp=1, data_tseg1=16, data_tseg2=7, data_sjw=1"

# The FD capable Channel (PCAN-USB Pro FD) is initialized
#
objPCAN = PCANBasic()
result = objPCAN.InitializeFD(PCAN_USBBUS1, bitrate)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    print "PCAN-USB Pro FD (Ch-1) was initialized"

# All initialized channels are released
#
objPCAN.Uninitialize(PCAN_NONEBUS)

3.Uninitialize

取消初始化 PCAN 通道。

# The Plug & Play Channel (PCAN-PCI) is initialized
#
objPCAN = PCANBasic()
result = objPCAN.Initialize(PCAN_PCIBUS1, PCAN_BAUD_500K)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    print "PCAN-PCI (Ch-1) was initialized"

....

# The PCI Channel is released
#
result = objPCAN.Uninitialize(PCAN_PCIBUS1)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    print "PCAN-PCI (Ch-1) was released"

4.Reset

重置 PCAN 通道的接收和发送队列。

# The PCI Channel is released
#
result = objPCAN.Reset(PCAN_PCIBUS1)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    print "PCAN-PCI (Ch-1) was reset"

5.GetStatus

获取 当前PCAN 通道的 BUS 状态。

# Check the status of the PCI Channel
#
result = objPCAN.GetStatus(PCAN_PCIBUS1)
if result == PCAN_ERROR_BUSLIGHT:
    print "PCAN-PCI (Ch-1): Handling a BUS-LIGHT status..."
elif result == PCAN_ERROR_BUSHEAVY:
    print "PCAN-PCI (Ch-1): Handling a BUS-HEAVY status..."
elif result == PCAN_ERROR_BUSOFF:
    print "PCAN-PCI (Ch-1): Handling a BUS-OFF status..."
elif result == PCAN_ERROR_OK:
    print "PCAN-PCI (Ch-1): Status is OK"
else:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]

6.Read

从 PCAN 通道的接收队列中读取 CAN 消息及其时间戳。

readResult = PCAN_ERROR_OK,
while (readResult[0] & PCAN_ERROR_QRCVEMPTY) != PCAN_ERROR_QRCVEMPTY:
    # Check the receive queue for new messages
    #
    readResult = objPCAN.Read(PCAN_USBBUS1)
    if readResult[0] != PCAN_ERROR_QRCVEMPTY:
        # Process the received message
        #
        print "A message was received"
        ProcessMessage(result[1],result[2]) # Possible processing function, ProcessMessage(msg,timestamp)
    else:
        # An error occurred, get a text describing the error and show it
        #
        result = objPCAN.GetErrorText(readResult[0])
        print result[1]
        HandleReadError(readResult[0]) # Possible errors handling function, HandleError(function_result)

7.ReadFD

从支持 FD 的 PCAN 通道的接收队列中读取 CAN 消息及其时间戳。

readResult = PCAN_ERROR_OK,
while (readResult[0] & PCAN_ERROR_QRCVEMPTY) != PCAN_ERROR_QRCVEMPTY:
    # Check the receive queue for new messages
    #
    readResult = objPCAN.ReadFD(PCAN_USBBUS1)
    if readResult[0] != PCAN_ERROR_QRCVEMPTY:
        # Process the received message
        #
        print "A message was received"
        ProcessMessage(result[1],result[2]) # Possible processing function, ProcessMessage(msg,timestamp)
    else:
        # An error occurred, get a text describing the error and show it
        #
        result = objPCAN.GetErrorText(readResult[0])
        print result[1]
        HandleReadError(readResult[0]) # Possible errors handling function, HandleError(function_result)

8.Write

发送 CAN 消息。

# A CAN message is configured
#
msg = TPCANMsg()
msg.ID = 0x100
msg.MSGTYPE = PCAN_MESSAGE_STANDARD
msg.LEN = 3
msg.DATA[0] = 1
msg.DATA[1] = 2
msg.DATA[2] = 3

#  The message is sent using the PCAN-USB Channel 1
#
result = objPCAN.Write(PCAN_USBBUS1,msg)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result
else:
    print "Message sent successfully"

9.WriteFD

使用支持 FD 的 PCAN 通道传输 CAN 消息。

# A CAN message is configured
#
msg = TPCANMsgFD()
msg.ID = 0x100
msg.MSGTYPE = PCAN_MESSAGE_STANDARD.value | PCAN_MESSAGE_FD.value

# DLC 9 means 12 data bytes
#
msg.DLC = 9
for i in range(12):
    msg.DATA[i] = i

#  The message is sent using the PCAN-USB Channel 1
#
result = objPCAN.WriteFD(PCAN_USBBUS1,msg)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result
else:
    print "Message sent successfully"

10.GetValue

从 PCAN 通道检索信息。

# The status of the message filter of the PCAN-USB Channel 1 is asked
#
result = objPCAN.GetValue(PCAN_USBBUS1,PCAN_MESSAGE_FILTER)
if result[0] != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result
else:
    # A text is shown giving information about the current status of the filter
    #
    if result[1] == PCAN_FILTER_OPEN:
        print "The message filter for the PCAN-USB, channel 1, is completely opened."
    elif result[1] == PCAN_FILTER_CLOSE:
        print "The message filter for the PCAN-USB, channel 1, is closed."
    elif result[1] == PCAN_FILTER_CUSTOM:
        print "The message filter for the PCAN-USB, channel 1, is custom configured."

11.SetValue

设置 PCAN 通道内的配置或信息值。

# The path for the Log file is set.
# Note that this parameter is set using the
# default Channel (PCAN_NONEBUS)
#
strBuffer = "C:UsersAdminDesktop"
result = objPCAN.SetValue(PCAN_NONEBUS,PCAN_LOG_LOCATION,strBuffer)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    print "Log path was successfully set"
12.FilterMessages
配置接收过滤器。
#  The message filter is closed first to ensure the reception of the new range of IDs.
#
result = objPCAN.SetValue(PCAN_USBBUS1,PCAN_MESSAGE_FILTER,PCAN_FILTER_CLOSE)
if result != PCAN_ERROR_OK:
    # An error occurred, get a text describing the error and show it
    #
    result = objPCAN.GetErrorText(result)
    print result[1]
else:
    # The message filter is configured to receive the IDs 2,3,4 and 5 on the PCAN-USB, Channel 1
    #
    result = objPCAN.FilterMessages(PCAN_USBBUS1,2,5,PCAN_MODE_STANDARD)
    if result != PCAN_ERROR_OK:
        # An error occurred, get a text describing the error and show it
        #
        result = objPCAN.GetErrorText(result)
        print result[1]
    else:
        print "Filter successfully configured for IDs 2,3,4 and 5"

12.GetErrorText

获取错误代码的信息。

# Gets the description text for PCAN_ERROR_INITIALIZE using the language ID for Spanish
#
objPCAN = PCANBasic()
result = objPCAN.GetErrorText(PCAN_ERROR_INITIALIZE, 10)
if result[0] != PCAN_ERROR_OK:
    # An error occurred, show a message indicating it
    #
    print "Error when recovering Error-Code's description"
else:
    print result[1]
 

相关推荐