：Android中插入U盘，识别到容量，怎么使用手工命令进行挂载
紧急求助：Android中插入U盘，识别到容量，如何使用手工命令进行挂载？
Android中插入U盘，显示如下：
root@android:/mnt/sdcard # usb 2-1.2: new full speed USB device using s5pv210-oh
ci and address 4
usb 2-1.2: not running at top speed; connect to a high speed hub
usb 2-1.2: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.20 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
--------------------------------------
1.存在/sys/dev/devices/platform/s5pv210-ohci 该文件夹
2.已创建了 mkdir /mnt/usb
求助各位技术高手，目前如何使用命令，手工执行命令将该U盘信息挂载到/mnt/usb？？
希望大家帮忙下，非常感谢！
求手工挂载命令，求～～～～～
------解决方案--------------------
http://blog.csdn.net/zplove003/article/details/6978366
------解决方案--------------------
------解决方案--------------------
mount usb81 /mnt/usb
------解决方案--------------------
log信息都提示是sda设备和sda1分区了，看下在 /dev/block 目录下面有没有sda这个设备，有的话可以尝试： mount /dev/block/sda1 /mnt/usb 命令
Android中插入U盘，显示如下：
root@android:/mnt/sdcard # usb 2-1.2: new full speed USB device using s5pv210-oh
ci and address 4
usb 2-1.2: not running at top speed; connect to a high speed hub
usb 2-1.2: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.20 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] Attached SCSI removable disk
--------------------------------------
1.存在/sys/dev/devices/platform/s5pv210-ohci 该文件夹
2.已创建了 mkdir /mnt/usb
求助各位技术高手，目前如何使用命令，手工执行命令将该U盘信息挂载到/mnt/usb？？
希望大家帮忙下，非常感谢！
求手工挂载命令，求～～～～～
------解决方案--------------------
http://blog.csdn.net/zplove003/article/details/6978366
------解决方案--------------------
------解决方案--------------------
mount usb81 /mnt/usb
------解决方案--------------------
log信息都提示是sda设备和sda1分区了，看下在 /dev/block 目录下面有没有sda这个设备，有的话可以尝试： mount /dev/block/sda1 /mnt/usb 命令