Java并发编程: 运用CountDownLatch协调子线程

/**
 * A synchronization aid that allows one or more threads to wait until
 * a set of operations being performed in other threads completes.
 *
 * <p>A {@code CountDownLatch} is initialized with a given [i]count[/i].
 * The {@link #await await} methods block until the current count reaches
 * zero due to invocations of the {@link #countDown} method, after which
 * all waiting threads are released and any subsequent invocations of
 * {@link #await await} return immediately.  This is a one-shot phenomenon
 * -- the count cannot be reset.  If you need a version that resets the
 * count, consider using a {@link CyclicBarrier}.
 *
 */

/*
 * @(#)CountDownLatch.java	1.5 04/02/09
 *
 * Copyright 2004 Sun Microsystems, Inc. All rights reserved.
 * SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
 */

package java.util.concurrent;
import java.util.concurrent.locks.*;
import java.util.concurrent.atomic.*;

/**
 * A synchronization aid that allows one or more threads to wait until
 * a set of operations being performed in other threads completes.
 *
 * <p>A <tt>CountDownLatch</tt> is initialized with a given
 * [i]count[/i].  The {@link #await await} methods block until the current
 * {@link #getCount count} reaches zero due to invocations of the
 * {@link #countDown} method, after which all waiting threads are
 * released and any subsequent invocations of {@link #await await} return
 * immediately. This is a one-shot phenomenon -- the count cannot be
 * reset.  If you need a version that resets the count, consider using
 * a {@link CyclicBarrier}.
 *
 * <p>A <tt>CountDownLatch</tt> is a versatile synchronization tool
 * and can be used for a number of purposes.  A
 * <tt>CountDownLatch</tt> initialized with a count of one serves as a
 * simple on/off latch, or gate: all threads invoking {@link #await await}
 * wait at the gate until it is opened by a thread invoking {@link
 * #countDown}.  A <tt>CountDownLatch</tt> initialized to [i]N[/i]
 * can be used to make one thread wait until [i]N[/i] threads have
 * completed some action, or some action has been completed N times.
 * <p>A useful property of a <tt>CountDownLatch</tt> is that it
 * doesn't require that threads calling <tt>countDown</tt> wait for
 * the count to reach zero before proceeding, it simply prevents any
 * thread from proceeding past an {@link #await await} until all
 * threads could pass.
 *
 * <p><b>Sample usage:</b> Here is a pair of classes in which a group
 * of worker threads use two countdown latches:
 * [list]
 * <li>The first is a start signal that prevents any worker from proceeding
 * until the driver is ready for them to proceed;
 * <li>The second is a completion signal that allows the driver to wait
 * until all workers have completed.
 * [/list]
 *
 * <pre>
 * class Driver { // ...
 *   void main() throws InterruptedException {
 *     CountDownLatch startSignal = new CountDownLatch(1);
 *     CountDownLatch doneSignal = new CountDownLatch(N);
 *
 *     for (int i = 0; i < N; ++i) // create and start threads
 *       new Thread(new Worker(startSignal, doneSignal)).start();
 *
 *     doSomethingElse();            // don't let run yet
 *     startSignal.countDown();      // let all threads proceed
 *     doSomethingElse();
 *     doneSignal.await();           // wait for all to finish
 *   }
 * }
 *
 * class Worker implements Runnable {
 *   private final CountDownLatch startSignal;
 *   private final CountDownLatch doneSignal;
 *   Worker(CountDownLatch startSignal, CountDownLatch doneSignal) {
 *      this.startSignal = startSignal;
 *      this.doneSignal = doneSignal;
 *   }
 *   public void run() {
 *      try {
 *        startSignal.await();
 *        doWork();
 *        doneSignal.countDown();
 *      } catch (InterruptedException ex) {} // return;
 *   }
 *
 *   void doWork() { ... }
 * }
 *
 * </pre>
 *
 * <p>Another typical usage would be to divide a problem into N parts,
 * describe each part with a Runnable that executes that portion and
 * counts down on the latch, and queue all the Runnables to an
 * Executor.  When all sub-parts are complete, the coordinating thread
 * will be able to pass through await. (When threads must repeatedly
 * count down in this way, instead use a {@link CyclicBarrier}.)
 *
 * <pre>
 * class Driver2 { // ...
 *   void main() throws InterruptedException {
 *     CountDownLatch doneSignal = new CountDownLatch(N);
 *     Executor e = ...
 *
 *     for (int i = 0; i < N; ++i) // create and start threads
 *       e.execute(new WorkerRunnable(doneSignal, i));
 *
 *     doneSignal.await();           // wait for all to finish
 *   }
 * }
 *
 * class WorkerRunnable implements Runnable {
 *   private final CountDownLatch doneSignal;
 *   private final int i;
 *   WorkerRunnable(CountDownLatch doneSignal, int i) {
 *      this.doneSignal = doneSignal;
 *      this.i = i;
 *   }
 *   public void run() {
 *      try {
 *        doWork(i);
 *        doneSignal.countDown();
 *      } catch (InterruptedException ex) {} // return;
 *   }
 *
 *   void doWork() { ... }
 * }
 *
 * </pre>
 *
 * @since 1.5
 * @author Doug Lea
 */
public class CountDownLatch {
    /**
     * Synchronization control For CountDownLatch.
     * Uses AQS state to represent count.
     */
    private static final class Sync extends AbstractQueuedSynchronizer {
        Sync(int count) {
            setState(count); 
        }
        
        int getCount() {
            return getState();
        }

        public int tryAcquireShared(int acquires) {
            return getState() == 0? 1 : -1;
        }
        
        public boolean tryReleaseShared(int releases) {
            // Decrement count; signal when transition to zero
            for (;;) {
                int c = getState();
                if (c == 0)
                    return false;
                int nextc = c-1;
                if (compareAndSetState(c, nextc)) 
                    return nextc == 0;
            }
        }
    }

    private final Sync sync;
    /**
     * Constructs a <tt>CountDownLatch</tt> initialized with the given
     * count.
     * 
     * @param count the number of times {@link #countDown} must be invoked
     * before threads can pass through {@link #await}.
     *
     * @throws IllegalArgumentException if <tt>count</tt> is less than zero.
     */
    public CountDownLatch(int count) { 
        if (count < 0) throw new IllegalArgumentException("count < 0");
        this.sync = new Sync(count);
    }

    /**
     * Causes the current thread to wait until the latch has counted down to 
     * zero, unless the thread is {@link Thread#interrupt interrupted}.
     *
     * <p>If the current {@link #getCount count} is zero then this method
     * returns immediately.
     * <p>If the current {@link #getCount count} is greater than zero then
     * the current thread becomes disabled for thread scheduling 
     * purposes and lies dormant until one of two things happen:
     * [list]
     * <li>The count reaches zero due to invocations of the
     * {@link #countDown} method; or
     * <li>Some other thread {@link Thread#interrupt interrupts} the current
     * thread.
     * [/list]
     * <p>If the current thread:
     * [list]
     * <li>has its interrupted status set on entry to this method; or 
     * <li>is {@link Thread#interrupt interrupted} while waiting, 
     * [/list]
     * then {@link InterruptedException} is thrown and the current thread's 
     * interrupted status is cleared. 
     *
     * @throws InterruptedException if the current thread is interrupted
     * while waiting.
     */
    public void await() throws InterruptedException {
        sync.acquireSharedInterruptibly(1);
    }

    /**
     * Causes the current thread to wait until the latch has counted down to 
     * zero, unless the thread is {@link Thread#interrupt interrupted},
     * or the specified waiting time elapses.
     *
     * <p>If the current {@link #getCount count} is zero then this method
     * returns immediately with the value <tt>true</tt>.
     *
     * <p>If the current {@link #getCount count} is greater than zero then
     * the current thread becomes disabled for thread scheduling 
     * purposes and lies dormant until one of three things happen:
     * [list]
     * <li>The count reaches zero due to invocations of the
     * {@link #countDown} method; or
     * <li>Some other thread {@link Thread#interrupt interrupts} the current
     * thread; or
     * <li>The specified waiting time elapses.
     * [/list]
     * <p>If the count reaches zero then the method returns with the
     * value <tt>true</tt>.
     * <p>If the current thread:
     * [list]
     * <li>has its interrupted status set on entry to this method; or 
     * <li>is {@link Thread#interrupt interrupted} while waiting, 
     * [/list]
     * then {@link InterruptedException} is thrown and the current thread's 
     * interrupted status is cleared. 
     *
     * <p>If the specified waiting time elapses then the value <tt>false</tt>
     * is returned.
     * If the time is 
     * less than or equal to zero, the method will not wait at all.
     *
     * @param timeout the maximum time to wait
     * @param unit the time unit of the <tt>timeout</tt> argument.
     * @return <tt>true</tt> if the count reached zero  and <tt>false</tt>
     * if the waiting time elapsed before the count reached zero.
     *
     * @throws InterruptedException if the current thread is interrupted
     * while waiting.
     */
    public boolean await(long timeout, TimeUnit unit) 
        throws InterruptedException {
        return sync.tryAcquireSharedNanos(1, unit.toNanos(timeout));
    }

    /**
     * Decrements the count of the latch, releasing all waiting threads if
     * the count reaches zero.
     * <p>If the current {@link #getCount count} is greater than zero then
     * it is decremented. If the new count is zero then all waiting threads
     * are re-enabled for thread scheduling purposes.
     * <p>If the current {@link #getCount count} equals zero then nothing
     * happens.
     */
    public void countDown() {
        sync.releaseShared(1);
    }

    /**
     * Returns the current count.
     * <p>This method is typically used for debugging and testing purposes.
     * @return the current count.
     */
    public long getCount() {
        return sync.getCount();
    }

    /**
     * Returns a string identifying this latch, as well as its state.
     * The state, in brackets, includes the String 
     * "Count =" followed by the current count.
     * @return a string identifying this latch, as well as its
     * state
     */
    public String toString() {
        return super.toString() + "[Count = " + sync.getCount() + "]";
    }

}

package my.concurrent.countdown;

import java.util.concurrent.Callable;
import java.util.concurrent.CountDownLatch;

public class Calculator implements Callable<Integer> {

	//开始信号
	private final CountDownLatch startSignal;
	
	//结束信号
	private final CountDownLatch doneSignal;
	
	private int groupNumber = 0;

	/**
	 * @param startSignal
	 * @param endSignal
	 * @param groupId
	 */
	public Calculator(CountDownLatch startSignal, CountDownLatch doneSignal,
			int groupNumber) {
		this.startSignal = startSignal;
		this.doneSignal = doneSignal;
		this.groupNumber = groupNumber;
	}

	public Integer call() throws Exception {

		startSignal.await();

		Integer result = sum(groupNumber);

		printCompleteInfor(groupNumber,result);
		
		doneSignal.countDown();

		return result;
	}

	private Integer sum(int groupNumber) {
		if (groupNumber < 1) {
			throw new IllegalArgumentException();
		}

		int sum = 0;
		int start = (groupNumber - 1) * 10 + 1;
		int end = groupNumber * 10;
		for (int i = start; i <= end; i++) {
			sum += i;
		}
		return sum;
	}
	
	private void printCompleteInfor(int groupNumber, int sum)
	{
		System.out.println(String.format("Group %d is finished, the sum in this gropu is %d", groupNumber, sum));
	}

}

package my.concurrent.countdown;

import java.util.ArrayList;
import java.util.List;
import java.util.concurrent.CountDownLatch;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Executors;
import java.util.concurrent.Future;

public class CountDownLatchTest {

	public static void main(String[] args) throws Exception {
		/**
		 * 1－100求和，分10个线程来计算，每个线程对10个数求和。
		 */
		int numOfGroups = 10;
		CountDownLatch startSignal = new CountDownLatch(1);
		
		CountDownLatch doneSignal = new CountDownLatch(numOfGroups);
		
		ExecutorService service = Executors.newFixedThreadPool(numOfGroups);
		List<Future<Integer>> futures = new ArrayList<Future<Integer>>();

		submit(futures, numOfGroups, service, startSignal, doneSignal);
		
		/**
		 * 开始，让所有的求和计算线程运行
		 */
		startSignal.countDown();
		
		/**
		 * 阻塞，知道所有计算线程完成计算
		 */
		doneSignal.await();

		shutdown(service);
		
		printResult(futures);
	}

	private static void submit(List<Future<Integer>> futures, int numOfGroups,
			ExecutorService service, CountDownLatch startSignal,
			CountDownLatch doneSignal) {
		for (int groupNumber = 1; groupNumber <= numOfGroups; groupNumber++) {
			futures.add(service.submit(new Calculator(startSignal, doneSignal,
					groupNumber)));
		}
	}

	private static int getResult(List<Future<Integer>> futures)
			throws InterruptedException, ExecutionException {
		int result = 0;
		for (Future<Integer> f : futures) {
			result += f.get();
		}
		return result;
	}

	private static void printResult(List<Future<Integer>> futures)
			throws InterruptedException, ExecutionException {
		System.out.println("[1,100] Sum is :" + getResult(futures));
	}
	
	private static void shutdown(ExecutorService service)
	{
		service.shutdown();
	}

}

    /**
     * Waits if necessary for the computation to complete, and then
     * retrieves its result.
     *
     * @return the computed result
     * @throws CancellationException if the computation was cancelled
     * @throws ExecutionException if the computation threw an
     * exception
     * @throws InterruptedException if the current thread was interrupted
     * while waiting
     */
    V get() throws InterruptedException, ExecutionException;

    /**
     * Waits if necessary for at most the given time for the computation
     * to complete, and then retrieves its result, if available.
     *
     * @param timeout the maximum time to wait
     * @param unit the time unit of the timeout argument
     * @return the computed result
     * @throws CancellationException if the computation was cancelled
     * @throws ExecutionException if the computation threw an
     * exception
     * @throws InterruptedException if the current thread was interrupted
     * while waiting
     * @throws TimeoutException if the wait timed out
     */
    V get(long timeout, TimeUnit unit)
        throws InterruptedException, ExecutionException, TimeoutException;

        /**  
         * 开始，让所有的求和计算线程运行  
         */  
        startSignal.countDown();   
           
        /**  
         * 阻塞，直到所有计算线程完成计算  
         */  
        doneSignal.await();   
  
        shutdown(service);   
        
       /**
         * 计算并打印出求和内容        
        */ 
        printResult(futures);