关于VB界面自适应荧屏
关于VB界面自适应屏幕
Option Explicit
Private FormOldWidth As Long
'保存窗体的原始宽度
Private FormOldHeight As Long
'保存窗体的原始高度
'在调用ResizeForm前先调用本函数
Private Sub ResizeInit(FormName As Form)
Dim Obj As Control
FormOldWidth = FormName.ScaleWidth
FormOldHeight = FormName.ScaleHeight
On Error Resume Next
For Each Obj In FormName
Obj.Tag = Obj.Left & " " & Obj.Top & " " & Obj.Width & " " & Obj.Height & " "
Next Obj
On Error GoTo 0
End Sub
'按比例改变表单内各元件的大小，在调用ReSizeForm前先调用ReSizeInit函数
Private Sub ResizeForm(FormName As Form)
Dim Pos(4) As Double
Dim i As Long, TempPos As Long, StartPos As Long
Dim Obj As Control
Dim ScaleX As Double, ScaleY As Double
ScaleX = FormName.ScaleWidth / FormOldWidth
'保存窗体宽度缩放比例
ScaleY = FormName.ScaleHeight / FormOldHeight
'保存窗体高度缩放比例
On Error Resume Next
For Each Obj In FormName
StartPos = 1
For i = 0 To 4
'读取控件的原始位置与大小
TempPos = InStr(StartPos, Obj.Tag, " ", vbTextCompare)
If TempPos > 0 Then
Pos(i) = Mid(Obj.Tag, StartPos, TempPos - StartPos)
StartPos = TempPos + 1
Else
Pos(i) = 0
End If
'根据控件的原始位置及窗体改变大小的比例对控件重新定位与改变大小
Obj.Move Pos(0) * ScaleX, Pos(1) * ScaleY, Pos(2) * ScaleX, Pos(3) * ScaleY
Next i
Next Obj
On Error GoTo 0
End Sub
'开发软件时候,把这个modal装入程序中.然后加入如下代码:
Private Sub Form_Load()
Call ResizeInit(Me) '在程序装入时必须加入
End Sub
Private Sub Form_Resize()
Call ResizeForm(Me) '确保窗体改变时控件随之改变
End Sub
这段程序是网上的。我想说这段程序为什么对我的COMBOBOX 无效呢 其他COMMON LABEL。picture都可以。。
Option Explicit
Private FormOldWidth As Long
'保存窗体的原始宽度
Private FormOldHeight As Long
'保存窗体的原始高度
'在调用ResizeForm前先调用本函数
Private Sub ResizeInit(FormName As Form)
Dim Obj As Control
FormOldWidth = FormName.ScaleWidth
FormOldHeight = FormName.ScaleHeight
On Error Resume Next
For Each Obj In FormName
Obj.Tag = Obj.Left & " " & Obj.Top & " " & Obj.Width & " " & Obj.Height & " "
Next Obj
On Error GoTo 0
End Sub
'按比例改变表单内各元件的大小，在调用ReSizeForm前先调用ReSizeInit函数
Private Sub ResizeForm(FormName As Form)
Dim Pos(4) As Double
Dim i As Long, TempPos As Long, StartPos As Long
Dim Obj As Control
Dim ScaleX As Double, ScaleY As Double
ScaleX = FormName.ScaleWidth / FormOldWidth
'保存窗体宽度缩放比例
ScaleY = FormName.ScaleHeight / FormOldHeight
'保存窗体高度缩放比例
On Error Resume Next
For Each Obj In FormName
StartPos = 1
For i = 0 To 4
'读取控件的原始位置与大小
TempPos = InStr(StartPos, Obj.Tag, " ", vbTextCompare)
If TempPos > 0 Then
Pos(i) = Mid(Obj.Tag, StartPos, TempPos - StartPos)
StartPos = TempPos + 1
Else
Pos(i) = 0
End If
'根据控件的原始位置及窗体改变大小的比例对控件重新定位与改变大小
Obj.Move Pos(0) * ScaleX, Pos(1) * ScaleY, Pos(2) * ScaleX, Pos(3) * ScaleY
Next i
Next Obj
On Error GoTo 0
End Sub
'开发软件时候,把这个modal装入程序中.然后加入如下代码:
Private Sub Form_Load()
Call ResizeInit(Me) '在程序装入时必须加入
End Sub
Private Sub Form_Resize()
Call ResizeForm(Me) '确保窗体改变时控件随之改变
End Sub
这段程序是网上的。我想说这段程序为什么对我的COMBOBOX 无效呢 其他COMMON LABEL。picture都可以。。