maven使用nexus3.3在windows下搭建私服

  1 <?xml version="1.0" encoding="UTF-8"?>
  2 
  3 <!--
  4 Licensed to the Apache Software Foundation (ASF) under one
  5 or more contributor license agreements.  See the NOTICE file
  6 distributed with this work for additional information
  7 regarding copyright ownership.  The ASF licenses this file
  8 to you under the Apache License, Version 2.0 (the
  9 "License"); you may not use this file except in compliance
 10 with the License.  You may obtain a copy of the License at
 11 
 12     http://www.apache.org/licenses/LICENSE-2.0
 13 
 14 Unless required by applicable law or agreed to in writing,
 15 software distributed under the License is distributed on an
 16 "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 17 KIND, either express or implied.  See the License for the
 18 specific language governing permissions and limitations
 19 under the License.
 20 -->
 21 
 22 <!--
 23  | This is the configuration file for Maven. It can be specified at two levels:
 24  |
 25  |  1. User Level. This settings.xml file provides configuration for a single user,
 26  |                 and is normally provided in ${user.home}/.m2/settings.xml.
 27  |
 28  |                 NOTE: This location can be overridden with the CLI option:
 29  |
 30  |                 -s /path/to/user/settings.xml
 31  |
 32  |  2. Global Level. This settings.xml file provides configuration for all Maven
 33  |                 users on a machine (assuming they're all using the same Maven
 34  |                 installation). It's normally provided in
 35  |                 ${maven.home}/conf/settings.xml.
 36  |
 37  |                 NOTE: This location can be overridden with the CLI option:
 38  |
 39  |                 -gs /path/to/global/settings.xml
 40  |
 41  | The sections in this sample file are intended to give you a running start at
 42  | getting the most out of your Maven installation. Where appropriate, the default
 43  | values (values used when the setting is not specified) are provided.
 44  |
 45  |-->
 46 <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
 47           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 48           xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
 49     <!-- localRepository
 50    | The path to the local repository maven will use to store artifacts.
 51    |
 52    | Default: ${user.home}/.m2/repository  -->
 53     <localRepository>C:/path/to/local/repo</localRepository>
 54 
 55 
 56     <!-- interactiveMode
 57    | This will determine whether maven prompts you when it needs input. If set to false,
 58    | maven will use a sensible default value, perhaps based on some other setting, for
 59    | the parameter in question.
 60    |
 61    | Default: true
 62   <interactiveMode>true</interactiveMode>
 63   -->
 64 
 65     <!-- offline
 66    | Determines whether maven should attempt to connect to the network when executing a build.
 67    | This will have an effect on artifact downloads, artifact deployment, and others.
 68    |
 69    | Default: false
 70   <offline>false</offline>
 71   -->
 72 
 73     <!-- pluginGroups
 74    | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
 75    | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
 76    | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
 77    |-->
 78     <pluginGroups>
 79         <!-- pluginGroup
 80      | Specifies a further group identifier to use for plugin lookup.
 81     <pluginGroup>com.your.plugins</pluginGroup>
 82     -->
 83         <pluginGroup>org.sonatype.plugins</pluginGroup>
 84         <pluginGroup>org.mortbay.jetty</pluginGroup>
 85     </pluginGroups>
 86 
 87     <!-- proxies
 88    | This is a list of proxies which can be used on this machine to connect to the network.
 89    | Unless otherwise specified (by system property or command-line switch), the first proxy
 90    | specification in this list marked as active will be used.
 91    |-->
 92     <proxies>
 93         <!-- proxy
 94      | Specification for one proxy, to be used in connecting to the network.
 95      |
 96     <proxy>
 97       <id>optional</id>
 98       <active>true</active>
 99       <protocol>http</protocol>
100       <username>proxyuser</username>
101       <password>proxypass</password>
102       <host>proxy.host.net</host>
103       <port>80</port>
104       <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
105     </proxy>
106     -->
107     </proxies>
108 
109     <!-- servers
110    | This is a list of authentication profiles, keyed by the server-id used within the system.
111    | Authentication profiles can be used whenever maven must make a connection to a remote server.
112    |-->
113     <servers>
114         <!-- server
115      | Specifies the authentication information to use when connecting to a particular server, identified by
116      | a unique name within the system (referred to by the 'id' attribute below).
117      |
118      | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
119      |       used together.
120      |
121     <server>
122       <id>deploymentRepo</id>
123       <username>repouser</username>
124       <password>repopwd</password>
125     </server>
126     -->
127 
128         <!-- Another sample, using keys to authenticate.
129     <server>
130       <id>siteServer</id>
131       <privateKey>/path/to/private/key</privateKey>
132       <passphrase>optional; leave empty if not used.</passphrase>
133     </server>
134     -->
135         <server>
136             <id>nexus</id>
137             <username>admin</username>
138             <password>admin123</password>
139         </server>
140         <server>
141             <id>ali</id>
142             <username>ali</username>
143             <password>ali</password>
144         </server>
145         <server>
146             <id>Snapshots</id>
147             <username>ali</username>
148             <password>ali</password>
149         </server>
150     </servers>
151 
152     <!-- mirrors
153    | This is a list of mirrors to be used in downloading artifacts from remote repositories.
154    |
155    | It works like this: a POM may declare a repository to use in resolving certain artifacts.
156    | However, this repository may have problems with heavy traffic at times, so people have mirrored
157    | it to several places.
158    |
159    | That repository definition will have a unique id, so we can create a mirror reference for that
160    | repository, to be used as an alternate download site. The mirror site will be the preferred
161    | server for that repository.
162    |-->
163     <mirrors>
164         <!-- mirror
165      | Specifies a repository mirror site to use instead of a given repository. The repository that
166      | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
167      | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
168      |
169     <mirror>
170       <id>mirrorId</id>
171       <mirrorOf>repositoryId</mirrorOf>
172       <name>Human Readable Name for this Mirror.</name>
173       <url>http://my.repository.com/repo/path</url>
174     </mirror>
175      -->
176         <mirror>
177             <id>nexus</id>
178             <mirrorOf>*</mirrorOf>
179             <url>http://localhost:8081/repository/maven-public/</url>
180         </mirror>
181         <mirror>
182             <!--This sends everything else to /public -->
183             <id>ali</id>
184             <mirrorOf>*</mirrorOf> 
185             <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
186         </mirror>
187         <mirror>
188             <!--This is used to direct the public snapshots repo in the 
189           profile below over to a different nexus group -->
190             <id>nexus-public-snapshots</id>
191             <mirrorOf>public-snapshots</mirrorOf>
192             <!--
193       <url>http://10.58.120.19:8058/nexus/content/repositories/snapshots</url>
194            -->
195             <url>http://maven.aliyun.com/nexus/content/repositories/snapshots/</url>
196         </mirror>
197     </mirrors>
198 
199     <!-- profiles
200    | This is a list of profiles which can be activated in a variety of ways, and which can modify
201    | the build process. Profiles provided in the settings.xml are intended to provide local machine-
202    | specific paths and repository locations which allow the build to work in the local environment.
203    |
204    | For example, if you have an integration testing plugin - like cactus - that needs to know where
205    | your Tomcat instance is installed, you can provide a variable here such that the variable is
206    | dereferenced during the build process to configure the cactus plugin.
207    |
208    | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
209    | section of this document (settings.xml) - will be discussed later. Another way essentially
210    | relies on the detection of a system property, either matching a particular value for the property,
211    | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
212    | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
213    | Finally, the list of active profiles can be specified directly from the command line.
214    |
215    | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
216    |       repositories, plugin repositories, and free-form properties to be used as configuration
217    |       variables for plugins in the POM.
218    |
219    |-->
220     <profiles>
221         <!-- profile
222      | Specifies a set of introductions to the build process, to be activated using one or more of the
223      | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
224      | or the command line, profiles have to have an ID that is unique.
225      |
226      | An encouraged best practice for profile identification is to use a consistent naming convention
227      | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
228      | This will make it more intuitive to understand what the set of introduced profiles is attempting
229      | to accomplish, particularly when you only have a list of profile id's for debug.
230      |
231      | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
232     <profile>
233       <id>jdk-1.4</id>
234 
235       <activation>
236         <jdk>1.4</jdk>
237       </activation>
238 
239       <repositories>
240         <repository>
241           <id>jdk14</id>
242           <name>Repository for JDK 1.4 builds</name>
243           <url>http://www.myhost.com/maven/jdk14</url>
244           <layout>default</layout>
245           <snapshotPolicy>always</snapshotPolicy>
246         </repository>
247       </repositories>
248     </profile>
249     -->
250 
251         <!--
252      | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
253      | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
254      | might hypothetically look like:
255      |
256      | ...
257      | <plugin>
258      |   <groupId>org.myco.myplugins</groupId>
259      |   <artifactId>myplugin</artifactId>
260      |
261      |   <configuration>
262      |     <tomcatLocation>${tomcatPath}</tomcatLocation>
263      |   </configuration>
264      | </plugin>
265      | ...
266      |
267      | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
268      |       anything, you could just leave off the <value/> inside the activation-property.
269      |
270     <profile>
271       <id>env-dev</id>
272 
273       <activation>
274         <property>
275           <name>target-env</name>
276           <value>dev</value>
277         </property>
278       </activation>
279 
280       <properties>
281         <tomcatPath>/path/to/tomcat/instance</tomcatPath>
282       </properties>
283     </profile>
284     -->
285         <profile>
286             <id>nexus</id>
287             <repositories>
288                 <repository>
289                     <id>central</id>
290                     <url>http://central</url>
291                     <releases>
292                         <enabled>true</enabled>
293                     </releases>
294                     <snapshots>
295                         <enabled>true</enabled>
296                     </snapshots>
297                 </repository>
298             </repositories>
299 
300             <pluginRepositories>
301                 <pluginRepository>
302                     <id>central</id>
303                     <url>http://central</url>
304                     <releases>
305                         <enabled>true</enabled>
306                     </releases>
307                     <snapshots>
308                         <enabled>true</enabled>
309                     </snapshots>
310                 </pluginRepository>
311             </pluginRepositories>
312         </profile>
313         <profile>
314             <id>development</id>
315             <repositories>
316                 <repository>
317                     <id>central</id>
318                     <url>http://central</url>
319                     <releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
320                     <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
321                 </repository>
322             </repositories>
323             <pluginRepositories>
324                 <pluginRepository>
325                     <id>central</id>
326                     <url>http://central</url>
327                     <releases><enabled>true</enabled><updatePolicy>always</updatePolicy></releases>
328                     <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
329                 </pluginRepository>
330             </pluginRepositories>
331         </profile>
332         <profile>
333             <!--this profile will allow snapshots to be searched when activated-->
334             <id>public-snapshots</id>
335             <repositories>
336                 <repository>
337                     <id>public-snapshots</id>
338                     <url>http://public-snapshots</url>
339                     <releases><enabled>false</enabled></releases>
340                     <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
341                 </repository>
342             </repositories>
343             <pluginRepositories>
344                 <pluginRepository>
345                     <id>public-snapshots</id>
346                     <url>http://public-snapshots</url>
347                     <releases><enabled>false</enabled></releases>
348                     <snapshots><enabled>true</enabled><updatePolicy>always</updatePolicy></snapshots>
349                 </pluginRepository>
350             </pluginRepositories>
351         </profile>
352     </profiles>
353 
354     <!-- activeProfiles
355    | List of profiles that are active for all builds.
356    |
357   <activeProfiles>
358     <activeProfile>alwaysActiveProfile</activeProfile>
359     <activeProfile>anotherAlwaysActiveProfile</activeProfile>
360   </activeProfiles>
361   -->
362     <activeProfiles>
363         <activeProfile>nexus</activeProfile>
364         <activeProfile>development</activeProfile>
365         <activeProfile>public-snapshots</activeProfile>
366     </activeProfiles>
367 </settings>

 1 <distributionManagement>
 2         <repository>
 3             <id>nexus</id>
 4             <name>Releases</name>
 5             <url>http://localhost:8081/repository/maven-releases</url>
 6         </repository>
 7         <snapshotRepository>
 8             <id>nexus</id>
 9             <name>Snapshot</name>
10             <url>http://localhost:8081/repository/maven-snapshots</url>
11         </snapshotRepository>
12     </distributionManagement>