hdu2435最大流最小割
2435 There is a war
题意:
给你一个有向图,其中可以有一条边是无敌的,这条边可以是图中的边,也可以是自己任意加上去的图中没有的边,这条无敌的边不可以摧毁,让1和n无法连通的最大摧毁费用,就是1到n的最小割中的最大的那个,这个题卡了好几天,一开始是各种方法各种wa,后来无意中发现自己犯了个sb错误,结果改正后以前的各种方法各种ac,比赛要是碰到这样的事估计就跪了...
思路:
首先能确定的就是题目要求咱们就最小割(最大流 = 最小割),但关键是有那么一条无坚不摧的nb道路,所以一开始的想法肯定是暴力枚举N*N的边,直接TLE出翔了,那么就优化,记得以前的一道题目 给你一个图求删除其中一条边最短路中最大的那个,答案是只枚举最短路上的边就可以了, 这个题目也是类似,只要枚举最小割后两个集合的点组成的边就行了,因为假如点a和点b是一个集合的,那么把边ab变成无敌的没有意思,最小割的值不会改变,,那么怎么吧分成两个集合呢,两种方法,一个是深搜,这个方法容易理解,先跑一遍最大流,然后从点1开始深搜,如果当前点走过或者没有流量了(跑完一遍最大流后的流量),直接continue,这样被mark的点就是左集合的点,剩下的就是右集合的点,还有一种方法就是直接看DINIC后的deep数组,如果不等于-1就是左集合的,否则的就是右集合的,这个我结论是网上的,我还不知道为什么,分成两个集合后就可以枚举两个集合的点建枚举的边了,这块也有两个方法,一个就是之前不是跑一边最大流了吗,加上当前枚举边,直接在残余网络上跑,取得最大的max最后输出一开始那个最大流maxflow+max,(记得每次跑之前都还原成第一次跑完的残余网路),第二种方法就是直接重新建边,一开始的时候吧m条边记录下来,每次枚举都重新建图,然后加上枚举的边跑,最后输出的是最大流中最大的那个maxflow.下面是三种方法的代码..
深搜找源集和汇集,在残余网络上跑 15ms AC
#include<stdio.h>
#include<string.h>
#include<queue>
#define inf 1000000000
int to ,next ,cost;
}STAR;
typedef struct
{
int x ,t;
}DEP;
STAR E[N_edge] ,E_[N_edge];
DEP xin ,tou;
int list[N_node] ,list1[N_node] ,tot;
int list2[N_node];
int deep[N_node];
int mks[N_node] ,mks_;
int mkh[N_node] ,mkh_;
int mark[N_node];
void add(int a ,int b ,int c)
{
E[++tot].to = b;
E[tot].cost = c;
E[tot].next = list[a];
list[a] = tot;
E[++tot].to = a;
E[tot].cost = 0;
E[tot].next = list[b];
list[b] = tot;
}
int minn(int a ,int b)
{
return a < b ? a : b;
}
bool BFS_DEEP(int s ,int t ,int n)
{
memset(deep ,255 ,sizeof(deep));
deep[s] = 0;
xin.x = s;
xin.t = 0;
queue<DEP>q;
q.push(xin);
while(!q.empty())
{
tou = q.front();
q.pop();
for(int k = list[tou.x] ;k ;k = E[k].next)
{
xin.x = E[k].to;
xin.t = tou.t + 1;
if(deep[xin.x] != -1 || !E[k].cost)
continue;
deep[xin.x] = xin.t;
q.push(xin);
}
}
for(int i = 0 ;i <= n ;i ++)
list1[i] = list[i];
return deep[t] != -1;
}
int DFS_MAX_FLOW(int s ,int t ,int flow)
{
if(s == t) return flow;
int nowflow = 0;
for(int k = list1[s] ;k ;k = E[k].next)
{
list1[s] = k;
int to = E[k].to;
int c = E[k].cost;
if(deep[to] != deep[s] + 1||!E[k].cost)
continue;
int tmp = DFS_MAX_FLOW(to ,t ,minn(c ,flow - nowflow));
nowflow += tmp;
E[k].cost -= tmp;
E[k^1].cost += tmp;
if(nowflow == flow)
break;
}
if(!nowflow)
deep[s] = 0;
return nowflow;
}
int DINIC(int s ,int t ,int n)
{
int ans = 0;
while(BFS_DEEP(s ,t ,n))
{
ans += DFS_MAX_FLOW(s ,t ,inf);
}
return ans;
}
void DFS(int s)
{
for(int k = list[s] ;k ;k = E[k].next)
{
int to = E[k].to;
if(mark[to] || !E[k].cost)
continue;
mark[to] = 1;
DFS(to);
}
return ;
}
int main ()
{
int n ,m ,i ,j ,t;
int a ,b ,c;
scanf("%d" ,&t);
while(t--)
{
memset(list ,0 ,sizeof(list));
tot = 1;
scanf("%d %d" ,&n ,&m);
for(i = 1 ;i <= m ;i ++)
{
scanf("%d %d %d" ,&a ,&b ,&c);
add(a ,b ,c);
}
int ans = DINIC(1 ,n ,n);
mks_ = mkh_ = 0;
memset(mark ,0 ,sizeof(mark));
mark[1] = 1;
DFS(1);
for(i = 2 ;i < n ;i ++)
if(mark[i]) mks[++mks_] = i;
else mkh[++mkh_] = i;
for(i = 1 ;i <= tot ;i ++)
E_[i] = E[i];
int mktot = tot;
for(i = 1 ;i <= n ;i ++)
list2[i] = list[i];
int max = 0;
for(i = 1 ;i <= mks_ ;i ++)
for(j = 1 ;j <= mkh_ ;j ++)
{
a = mks[i] ,b = mkh[j];
for(int k = 1 ;k <= mktot ;k ++)
E[k] = E_[k];
memset(list ,0 ,sizeof(list));
for(int k = 1 ;k <= n ;k ++)
list[k] = list2[k];
tot = mktot;
add(a ,b ,inf);
int tmp = DINIC(1 ,n ,n);
if(max < tmp) max = tmp;
}
printf("%d " ,ans + max);
}
return 0;
}
根据deep数组找源集和汇集,在残余网络上跑 31ms AC
#include<stdio.h>
#include<string.h>
#include<queue>
#define N_node 120
#define N_edge 22000
#define inf 1000000000
using namespace std;
typedef struct
{
int to ,next ,cost;
}STAR;
typedef struct
{
int x ,t;
}DEP;
STAR E[N_edge] ,E_[N_edge];
DEP xin ,tou;
int list[N_node] ,list1[N_node] ,tot;
int list2[N_node];
int deep[N_node];
int mks[N_node] ,mks_;
int mkh[N_node] ,mkh_;
void add(int a ,int b ,int c)
{
E[++tot].to = b;
E[tot].cost = c;
E[tot].next = list[a];
list[a] = tot;
E[++tot].to = a;
E[tot].cost = 0;
E[tot].next = list[b];
list[b] = tot;
}
int minn(int a ,int b)
{
return a < b ? a : b;
}
bool BFS_DEEP(int s ,int t ,int n)
{
memset(deep ,255 ,sizeof(deep));
deep[s] = 0;
xin.x = s;
xin.t = 0;
queue<DEP>q;
q.push(xin);
while(!q.empty())
{
tou = q.front();
q.pop();
for(int k = list[tou.x] ;k ;k = E[k].next)
{
xin.x = E[k].to;
xin.t = tou.t + 1;
if(deep[xin.x] != -1 || !E[k].cost)
continue;
deep[xin.x] = xin.t;
q.push(xin);
}
}
for(int i = 0 ;i <= n ;i ++)
list1[i] = list[i];
return deep[t] != -1;
}
int DFS_MAX_FLOW(int s ,int t ,int flow)
{
if(s == t) return flow;
int nowflow = 0;
for(int k = list1[s] ;k ;k = E[k].next)
{
list1[s] = k;
int to = E[k].to;
int c = E[k].cost;
if(deep[to] != deep[s] + 1||!E[k].cost)
continue;
int tmp = DFS_MAX_FLOW(to ,t ,minn(c ,flow - nowflow));
nowflow += tmp;
E[k].cost -= tmp;
E[k^1].cost += tmp;
if(nowflow == flow)
break;
}
if(!nowflow)
deep[s] = 0;
return nowflow;
}
int DINIC(int s ,int t ,int n)
{
int ans = 0;
while(BFS_DEEP(s ,t ,n))
{
ans += DFS_MAX_FLOW(s ,t ,inf);
}
return ans;
}
int main ()
{
int n ,m ,i ,j ,t;
int a ,b ,c;
scanf("%d" ,&t);
while(t--)
{
memset(list ,0 ,sizeof(list));
tot = 1;
scanf("%d %d" ,&n ,&m);
for(i = 1 ;i <= m ;i ++)
{
scanf("%d %d %d" ,&a ,&b ,&c);
add(a ,b ,c);
}
int ans = DINIC(1 ,n ,n);
mks_ = mkh_ = 0;
for(i = 2 ;i < n ;i ++)
if(deep[i] != -1) mks[++mks_] = i;
else mkh[++mkh_] = i;
for(i = 1 ;i <= tot ;i ++)
E_[i] = E[i];
int mktot = tot;
for(i = 1 ;i <= n ;i ++)
list2[i] = list[i];
int max = 0;
for(i = 1 ;i <= mks_ ;i ++)
for(j = 1 ;j <= mkh_ ;j ++)
{
a = mks[i] ,b = mkh[j];
for(int k = 1 ;k <= mktot ;k ++)
E[k] = E_[k];
memset(list ,0 ,sizeof(list));
for(int k = 1 ;k <= n ;k ++)
list[k] = list2[k];
tot = mktot;
add(a ,b ,inf);
int tmp = DINIC(1 ,n ,n);
if(max < tmp) max = tmp;
}
printf("%d " ,ans + max);
}
return 0;
}
直接重新建图,深搜找源集和汇集(容易理解) 15msAC
#include<string.h>
#include<queue>
#define N_node 120
#define N_edge 22000
#define inf 1000000000
using namespace std;
typedef struct
{
int to ,next ,cost;
}STAR;
typedef struct
{
int x ,t;
}DEP;
typedef struct
{
int a ,b ,c;
}EDGE;
STAR E[N_edge];
EDGE edge[N_edge];
DEP xin ,tou;
int list[N_node] ,list1[N_node] ,tot;
int deep[N_node];
int mks[N_node] ,mks_;
int mkh[N_node] ,mkh_;
int mark[N_node];
void add(int a ,int b ,int c)
{
E[++tot].to = b;
E[tot].cost = c;
E[tot].next = list[a];
list[a] = tot;
E[++tot].to = a;
E[tot].cost = 0;
E[tot].next = list[b];
list[b] = tot;
}
int minn(int a ,int b)
{
return a < b ? a : b;
}
bool BFS_DEEP(int s ,int t ,int n)
{
memset(deep ,255 ,sizeof(deep));
deep[s] = 0;
xin.x = s;
xin.t = 0;
queue<DEP>q;
q.push(xin);
while(!q.empty())
{
tou = q.front();
q.pop();
for(int k = list[tou.x] ;k ;k = E[k].next)
{
xin.x = E[k].to;
xin.t = tou.t + 1;
if(deep[xin.x] != -1 || !E[k].cost)
continue;
deep[xin.x] = xin.t;
q.push(xin);
}
}
for(int i = 0 ;i <= n ;i ++)
list1[i] = list[i];
return deep[t] != -1;
}
int DFS_MAX_FLOW(int s ,int t ,int flow)
{
if(s == t) return flow;
int nowflow = 0;
for(int k = list1[s] ;k ;k = E[k].next)
{
list1[s] = k;
int to = E[k].to;
int c = E[k].cost;
if(deep[to] != deep[s] + 1||!E[k].cost)
continue;
int tmp = DFS_MAX_FLOW(to ,t ,minn(c ,flow - nowflow));
nowflow += tmp;
E[k].cost -= tmp;
E[k^1].cost += tmp;
if(nowflow == flow)
break;
}
if(!nowflow)
deep[s] = 0;
return nowflow;
}
int DINIC(int s ,int t ,int n)
{
int ans = 0;
while(BFS_DEEP(s ,t ,n))
{
ans += DFS_MAX_FLOW(s ,t ,inf);
}
return ans;
}
void DFS(int s)
{
for(int k = list[s] ;k ;k = E[k].next)
{
int to = E[k].to;
if(mark[to] || !E[k].cost)
continue;
mark[to] = 1;
DFS(to);
}
return ;
}
int main ()
{
int n ,m ,i ,j ,t;
int a ,b ,c;
scanf("%d" ,&t);
while(t--)
{
memset(list ,0 ,sizeof(list));
tot = 1;
scanf("%d %d" ,&n ,&m);
for(i = 1 ;i <= m ;i ++)
{
scanf("%d %d %d" ,&a ,&b ,&c);
add(a ,b ,c);
edge[i].a = a ,edge[i].b = b ,edge[i].c = c;
}
int ans = DINIC(1 ,n ,n);
mks_ = mkh_ = 0;
memset(mark ,0 ,sizeof(mark));
mark[1] = 1;
DFS(1);
for(i = 2 ;i < n ;i ++)
if(mark[i]) mks[++mks_] = i;
else mkh[++mkh_] = i;
for(i = 1 ;i <= mks_ ;i ++)
for(j = 1 ;j <= mkh_ ;j ++)
{
a = mks[i] ,b = mkh[j];
memset(list ,0 ,sizeof(list));
tot = 1;
for(int k = 1 ;k <= m ;k ++)
add(edge[k].a ,edge[k].b ,edge[k].c);
add(a ,b ,inf);
int tmp = DINIC(1 ,n ,n);
if(ans < tmp) ans = tmp;
}
printf("%d " ,ans);
}
return 0;
}
题意:
给你一个有向图,其中可以有一条边是无敌的,这条边可以是图中的边,也可以是自己任意加上去的图中没有的边,这条无敌的边不可以摧毁,让1和n无法连通的最大摧毁费用,就是1到n的最小割中的最大的那个,这个题卡了好几天,一开始是各种方法各种wa,后来无意中发现自己犯了个sb错误,结果改正后以前的各种方法各种ac,比赛要是碰到这样的事估计就跪了...
思路:
首先能确定的就是题目要求咱们就最小割(最大流 = 最小割),但关键是有那么一条无坚不摧的nb道路,所以一开始的想法肯定是暴力枚举N*N的边,直接TLE出翔了,那么就优化,记得以前的一道题目 给你一个图求删除其中一条边最短路中最大的那个,答案是只枚举最短路上的边就可以了, 这个题目也是类似,只要枚举最小割后两个集合的点组成的边就行了,因为假如点a和点b是一个集合的,那么把边ab变成无敌的没有意思,最小割的值不会改变,,那么怎么吧分成两个集合呢,两种方法,一个是深搜,这个方法容易理解,先跑一遍最大流,然后从点1开始深搜,如果当前点走过或者没有流量了(跑完一遍最大流后的流量),直接continue,这样被mark的点就是左集合的点,剩下的就是右集合的点,还有一种方法就是直接看DINIC后的deep数组,如果不等于-1就是左集合的,否则的就是右集合的,这个我结论是网上的,我还不知道为什么,分成两个集合后就可以枚举两个集合的点建枚举的边了,这块也有两个方法,一个就是之前不是跑一边最大流了吗,加上当前枚举边,直接在残余网络上跑,取得最大的max最后输出一开始那个最大流maxflow+max,(记得每次跑之前都还原成第一次跑完的残余网路),第二种方法就是直接重新建边,一开始的时候吧m条边记录下来,每次枚举都重新建图,然后加上枚举的边跑,最后输出的是最大流中最大的那个maxflow.下面是三种方法的代码..
深搜找源集和汇集,在残余网络上跑 15ms AC
#include<stdio.h>
#include<string.h>
#include<queue>
#define N_node 120
#define N_edge 22000#define inf 1000000000
using namespace std;
typedef struct
{int to ,next ,cost;
}STAR;
typedef struct
{
int x ,t;
}DEP;
STAR E[N_edge] ,E_[N_edge];
DEP xin ,tou;
int list[N_node] ,list1[N_node] ,tot;
int list2[N_node];
int deep[N_node];
int mks[N_node] ,mks_;
int mkh[N_node] ,mkh_;
int mark[N_node];
void add(int a ,int b ,int c)
{
E[++tot].to = b;
E[tot].cost = c;
E[tot].next = list[a];
list[a] = tot;
E[++tot].to = a;
E[tot].cost = 0;
E[tot].next = list[b];
list[b] = tot;
}
int minn(int a ,int b)
{
return a < b ? a : b;
}
bool BFS_DEEP(int s ,int t ,int n)
{
memset(deep ,255 ,sizeof(deep));
deep[s] = 0;
xin.x = s;
xin.t = 0;
queue<DEP>q;
q.push(xin);
while(!q.empty())
{
tou = q.front();
q.pop();
for(int k = list[tou.x] ;k ;k = E[k].next)
{
xin.x = E[k].to;
xin.t = tou.t + 1;
if(deep[xin.x] != -1 || !E[k].cost)
continue;
deep[xin.x] = xin.t;
q.push(xin);
}
}
for(int i = 0 ;i <= n ;i ++)
list1[i] = list[i];
return deep[t] != -1;
}
int DFS_MAX_FLOW(int s ,int t ,int flow)
{
if(s == t) return flow;
int nowflow = 0;
for(int k = list1[s] ;k ;k = E[k].next)
{
list1[s] = k;
int to = E[k].to;
int c = E[k].cost;
if(deep[to] != deep[s] + 1||!E[k].cost)
continue;
int tmp = DFS_MAX_FLOW(to ,t ,minn(c ,flow - nowflow));
nowflow += tmp;
E[k].cost -= tmp;
E[k^1].cost += tmp;
if(nowflow == flow)
break;
}
if(!nowflow)
deep[s] = 0;
return nowflow;
}
int DINIC(int s ,int t ,int n)
{
int ans = 0;
while(BFS_DEEP(s ,t ,n))
{
ans += DFS_MAX_FLOW(s ,t ,inf);
}
return ans;
}
void DFS(int s)
{
for(int k = list[s] ;k ;k = E[k].next)
{
int to = E[k].to;
if(mark[to] || !E[k].cost)
continue;
mark[to] = 1;
DFS(to);
}
return ;
}
int main ()
{
int n ,m ,i ,j ,t;
int a ,b ,c;
scanf("%d" ,&t);
while(t--)
{
memset(list ,0 ,sizeof(list));
tot = 1;
scanf("%d %d" ,&n ,&m);
for(i = 1 ;i <= m ;i ++)
{
scanf("%d %d %d" ,&a ,&b ,&c);
add(a ,b ,c);
}
int ans = DINIC(1 ,n ,n);
mks_ = mkh_ = 0;
memset(mark ,0 ,sizeof(mark));
mark[1] = 1;
DFS(1);
for(i = 2 ;i < n ;i ++)
if(mark[i]) mks[++mks_] = i;
else mkh[++mkh_] = i;
for(i = 1 ;i <= tot ;i ++)
E_[i] = E[i];
int mktot = tot;
for(i = 1 ;i <= n ;i ++)
list2[i] = list[i];
int max = 0;
for(i = 1 ;i <= mks_ ;i ++)
for(j = 1 ;j <= mkh_ ;j ++)
{
a = mks[i] ,b = mkh[j];
for(int k = 1 ;k <= mktot ;k ++)
E[k] = E_[k];
memset(list ,0 ,sizeof(list));
for(int k = 1 ;k <= n ;k ++)
list[k] = list2[k];
tot = mktot;
add(a ,b ,inf);
int tmp = DINIC(1 ,n ,n);
if(max < tmp) max = tmp;
}
printf("%d " ,ans + max);
}
return 0;
}
根据deep数组找源集和汇集,在残余网络上跑 31ms AC
#include<stdio.h>
#include<string.h>
#include<queue>
#define N_node 120
#define N_edge 22000
#define inf 1000000000
using namespace std;
typedef struct
{
int to ,next ,cost;
}STAR;
typedef struct
{
int x ,t;
}DEP;
STAR E[N_edge] ,E_[N_edge];
DEP xin ,tou;
int list[N_node] ,list1[N_node] ,tot;
int list2[N_node];
int deep[N_node];
int mks[N_node] ,mks_;
int mkh[N_node] ,mkh_;
void add(int a ,int b ,int c)
{
E[++tot].to = b;
E[tot].cost = c;
E[tot].next = list[a];
list[a] = tot;
E[++tot].to = a;
E[tot].cost = 0;
E[tot].next = list[b];
list[b] = tot;
}
int minn(int a ,int b)
{
return a < b ? a : b;
}
bool BFS_DEEP(int s ,int t ,int n)
{
memset(deep ,255 ,sizeof(deep));
deep[s] = 0;
xin.x = s;
xin.t = 0;
queue<DEP>q;
q.push(xin);
while(!q.empty())
{
tou = q.front();
q.pop();
for(int k = list[tou.x] ;k ;k = E[k].next)
{
xin.x = E[k].to;
xin.t = tou.t + 1;
if(deep[xin.x] != -1 || !E[k].cost)
continue;
deep[xin.x] = xin.t;
q.push(xin);
}
}
for(int i = 0 ;i <= n ;i ++)
list1[i] = list[i];
return deep[t] != -1;
}
int DFS_MAX_FLOW(int s ,int t ,int flow)
{
if(s == t) return flow;
int nowflow = 0;
for(int k = list1[s] ;k ;k = E[k].next)
{
list1[s] = k;
int to = E[k].to;
int c = E[k].cost;
if(deep[to] != deep[s] + 1||!E[k].cost)
continue;
int tmp = DFS_MAX_FLOW(to ,t ,minn(c ,flow - nowflow));
nowflow += tmp;
E[k].cost -= tmp;
E[k^1].cost += tmp;
if(nowflow == flow)
break;
}
if(!nowflow)
deep[s] = 0;
return nowflow;
}
int DINIC(int s ,int t ,int n)
{
int ans = 0;
while(BFS_DEEP(s ,t ,n))
{
ans += DFS_MAX_FLOW(s ,t ,inf);
}
return ans;
}
int main ()
{
int n ,m ,i ,j ,t;
int a ,b ,c;
scanf("%d" ,&t);
while(t--)
{
memset(list ,0 ,sizeof(list));
tot = 1;
scanf("%d %d" ,&n ,&m);
for(i = 1 ;i <= m ;i ++)
{
scanf("%d %d %d" ,&a ,&b ,&c);
add(a ,b ,c);
}
int ans = DINIC(1 ,n ,n);
mks_ = mkh_ = 0;
for(i = 2 ;i < n ;i ++)
if(deep[i] != -1) mks[++mks_] = i;
else mkh[++mkh_] = i;
for(i = 1 ;i <= tot ;i ++)
E_[i] = E[i];
int mktot = tot;
for(i = 1 ;i <= n ;i ++)
list2[i] = list[i];
int max = 0;
for(i = 1 ;i <= mks_ ;i ++)
for(j = 1 ;j <= mkh_ ;j ++)
{
a = mks[i] ,b = mkh[j];
for(int k = 1 ;k <= mktot ;k ++)
E[k] = E_[k];
memset(list ,0 ,sizeof(list));
for(int k = 1 ;k <= n ;k ++)
list[k] = list2[k];
tot = mktot;
add(a ,b ,inf);
int tmp = DINIC(1 ,n ,n);
if(max < tmp) max = tmp;
}
printf("%d " ,ans + max);
}
return 0;
}
直接重新建图,深搜找源集和汇集(容易理解) 15msAC
#include<string.h>
#include<queue>
#define N_node 120
#define N_edge 22000
#define inf 1000000000
using namespace std;
typedef struct
{
int to ,next ,cost;
}STAR;
typedef struct
{
int x ,t;
}DEP;
typedef struct
{
int a ,b ,c;
}EDGE;
STAR E[N_edge];
EDGE edge[N_edge];
DEP xin ,tou;
int list[N_node] ,list1[N_node] ,tot;
int deep[N_node];
int mks[N_node] ,mks_;
int mkh[N_node] ,mkh_;
int mark[N_node];
void add(int a ,int b ,int c)
{
E[++tot].to = b;
E[tot].cost = c;
E[tot].next = list[a];
list[a] = tot;
E[++tot].to = a;
E[tot].cost = 0;
E[tot].next = list[b];
list[b] = tot;
}
int minn(int a ,int b)
{
return a < b ? a : b;
}
bool BFS_DEEP(int s ,int t ,int n)
{
memset(deep ,255 ,sizeof(deep));
deep[s] = 0;
xin.x = s;
xin.t = 0;
queue<DEP>q;
q.push(xin);
while(!q.empty())
{
tou = q.front();
q.pop();
for(int k = list[tou.x] ;k ;k = E[k].next)
{
xin.x = E[k].to;
xin.t = tou.t + 1;
if(deep[xin.x] != -1 || !E[k].cost)
continue;
deep[xin.x] = xin.t;
q.push(xin);
}
}
for(int i = 0 ;i <= n ;i ++)
list1[i] = list[i];
return deep[t] != -1;
}
int DFS_MAX_FLOW(int s ,int t ,int flow)
{
if(s == t) return flow;
int nowflow = 0;
for(int k = list1[s] ;k ;k = E[k].next)
{
list1[s] = k;
int to = E[k].to;
int c = E[k].cost;
if(deep[to] != deep[s] + 1||!E[k].cost)
continue;
int tmp = DFS_MAX_FLOW(to ,t ,minn(c ,flow - nowflow));
nowflow += tmp;
E[k].cost -= tmp;
E[k^1].cost += tmp;
if(nowflow == flow)
break;
}
if(!nowflow)
deep[s] = 0;
return nowflow;
}
int DINIC(int s ,int t ,int n)
{
int ans = 0;
while(BFS_DEEP(s ,t ,n))
{
ans += DFS_MAX_FLOW(s ,t ,inf);
}
return ans;
}
void DFS(int s)
{
for(int k = list[s] ;k ;k = E[k].next)
{
int to = E[k].to;
if(mark[to] || !E[k].cost)
continue;
mark[to] = 1;
DFS(to);
}
return ;
}
int main ()
{
int n ,m ,i ,j ,t;
int a ,b ,c;
scanf("%d" ,&t);
while(t--)
{
memset(list ,0 ,sizeof(list));
tot = 1;
scanf("%d %d" ,&n ,&m);
for(i = 1 ;i <= m ;i ++)
{
scanf("%d %d %d" ,&a ,&b ,&c);
add(a ,b ,c);
edge[i].a = a ,edge[i].b = b ,edge[i].c = c;
}
int ans = DINIC(1 ,n ,n);
mks_ = mkh_ = 0;
memset(mark ,0 ,sizeof(mark));
mark[1] = 1;
DFS(1);
for(i = 2 ;i < n ;i ++)
if(mark[i]) mks[++mks_] = i;
else mkh[++mkh_] = i;
for(i = 1 ;i <= mks_ ;i ++)
for(j = 1 ;j <= mkh_ ;j ++)
{
a = mks[i] ,b = mkh[j];
memset(list ,0 ,sizeof(list));
tot = 1;
for(int k = 1 ;k <= m ;k ++)
add(edge[k].a ,edge[k].b ,edge[k].c);
add(a ,b ,inf);
int tmp = DINIC(1 ,n ,n);
if(ans < tmp) ans = tmp;
}
printf("%d " ,ans);
}
return 0;
}