关于打印设置对话框设置页码范围之后打印份数不起作用,该怎么解决
关于打印设置对话框设置页码范围之后打印份数不起作用
关于打印设置对话框
如下的代码，在设置页码范围（比如2-5）之后，我再设置打印2份。
后面返回的时候份数还是1份，不知哪里设置不对。
另外，我如果选择打印全部，那么份数nCopies是起作用的，我设置2份就会返回2份。
PRINTDLG pd;
ZeroMemory(&pd, sizeof(pd));
pd.lStructSize = sizeof(pd);
pd.hwndOwner = ::GetActiveWindow();
pd.hDevMode = NULL; // Don't forget to free or store hDevMode.
pd.hDevNames = NULL; // Don't forget to free or store hDevNames.
pd.Flags = PD_COLLATE | PD_NOSELECTION; // | PD_RETURNDC
pd.nCopies = 1;
pd.nFromPage = 0x0;
pd.nToPage = 0x0;
pd.nMinPage = 1;
pd.nMaxPage = 0xFFFF;
CStringA name;
pd.lpPrintTemplateName = name;
CStringA setuptname;
pd.lpSetupTemplateName = setuptname;
if(PrintDlg(&pd)==TRUE)
{
------解决方案--------------------
[PrintDlg is available for use in the operating systems specified in the Requirements section. It may be altered or unavailable in subsequent versions. Instead, use PrintDlgEx or PageSetupDlg.]
所以用PRINTDLGEX
关于打印设置对话框
如下的代码，在设置页码范围（比如2-5）之后，我再设置打印2份。
后面返回的时候份数还是1份，不知哪里设置不对。
另外，我如果选择打印全部，那么份数nCopies是起作用的，我设置2份就会返回2份。
PRINTDLG pd;
ZeroMemory(&pd, sizeof(pd));
pd.lStructSize = sizeof(pd);
pd.hwndOwner = ::GetActiveWindow();
pd.hDevMode = NULL; // Don't forget to free or store hDevMode.
pd.hDevNames = NULL; // Don't forget to free or store hDevNames.
pd.Flags = PD_COLLATE | PD_NOSELECTION; // | PD_RETURNDC
pd.nCopies = 1;
pd.nFromPage = 0x0;
pd.nToPage = 0x0;
pd.nMinPage = 1;
pd.nMaxPage = 0xFFFF;
CStringA name;
pd.lpPrintTemplateName = name;
CStringA setuptname;
pd.lpSetupTemplateName = setuptname;
if(PrintDlg(&pd)==TRUE)
{
------解决方案--------------------
[PrintDlg is available for use in the operating systems specified in the Requirements section. It may be altered or unavailable in subsequent versions. Instead, use PrintDlgEx or PageSetupDlg.]
所以用PRINTDLGEX