如何使用端口编程将音频数据包发送到套接字/端口？

Hello Everyone，



我必须使用端口编程将音频数据包发送到套接字/端口。直到现在，借助alsa库（下面给出的完整代码），我已成功录制了一个带有麦克风的音频，并连接到我的笔记本电脑上。

Hello Everyone,

I have to send an audio packet to a socket/port using port programming. Till now, with the help of alsa library (the full code given below) I have successfully recorded an audio with a mic attached to my laptop.

/*
 * Sound.c
 *
 *  Created on: 05-Oct-2015
 *      Author: sudhakar
 */

#include <<stdio.h>>
#include <<stdlib.h>>
#include <<alsa/asoundlib.h>>

main (int argc, char *argv[])
{
  int i;
  int err;
  char *buffer;
  int buffer_frames = 128;
  unsigned int rate = 44100;
  snd_pcm_t *capture_handle;
  snd_pcm_hw_params_t *hw_params;
	snd_pcm_format_t format = SND_PCM_FORMAT_S16_LE;

  if ((err = snd_pcm_open (&capture_handle, argv[1], SND_PCM_STREAM_CAPTURE, 0)) < 0) {
    fprintf (stderr, "cannot open audio device %s (%s)\n",
             argv[1],
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "audio interface opened\n");

  if ((err = snd_pcm_hw_params_malloc (&hw_params)) < 0) {
    fprintf (stderr, "cannot allocate hardware parameter structure (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params allocated\n");

  if ((err = snd_pcm_hw_params_any (capture_handle, hw_params)) < 0) {
    fprintf (stderr, "cannot initialize hardware parameter structure (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params initialized\n");

  if ((err = snd_pcm_hw_params_set_access (capture_handle, hw_params, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
    fprintf (stderr, "cannot set access type (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params access setted\n");

  if ((err = snd_pcm_hw_params_set_format (capture_handle, hw_params, format)) < 0) {
    fprintf (stderr, "cannot set sample format (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params format setted\n");

  if ((err = snd_pcm_hw_params_set_rate_near (capture_handle, hw_params, &rate, 0)) < 0) {
    fprintf (stderr, "cannot set sample rate (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params rate setted\n");

  if ((err = snd_pcm_hw_params_set_channels (capture_handle, hw_params, 2)) < 0) {
    fprintf (stderr, "cannot set channel count (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params channels setted\n");

  if ((err = snd_pcm_hw_params (capture_handle, hw_params)) < 0) {
    fprintf (stderr, "cannot set parameters (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "hw_params setted\n");

  snd_pcm_hw_params_free (hw_params);

  fprintf(stdout, "hw_params freed\n");

  if ((err = snd_pcm_prepare (capture_handle)) < 0) {
    fprintf (stderr, "cannot prepare audio interface for use (%s)\n",
             snd_strerror (err));
    exit (1);
  }

  fprintf(stdout, "audio interface prepared\n");

  buffer = malloc(128 * snd_pcm_format_width(format) / 8 * 2);

  fprintf(stdout, "buffer allocated\n");

  for (i = 0; i < 1000; ++i) {
    if ((err = snd_pcm_readi (capture_handle, buffer, buffer_frames)) != buffer_frames) {
      fprintf (stderr, "read from audio interface failed (%s)\n", snd_strerror (err));
      exit (1);
    }
    fprintf(stdout, "read %d done\n", i);
  }

  fprintf(stderr, "%s", buffer); //Sir

  free(buffer);

  fprintf(stdout, "buffer freed\n");

  snd_pcm_close (capture_handle);
  fprintf(stdout, "audio interface closed\n");

  exit (0);
}

现在我想将音频直接发送到端口/插座端口编程。任何人都可以帮助我吗？感谢期待!!

Now I want to send the audio directly to a port/socket using port programming. Can anyone help me out in this? Thanking in anticipation!!