Hyperledger Fabric-是否可以从Docker群迁移到Kubernetes?

该过程确实非常简单，但无法避免kubernetes固有的更大复杂性(与集群相比)，从而导致更大的复杂性.复杂的配置.

The process can be really straightforward but it is not possible to avoid the inherent greater complexity of kubernetes (compared to swarm) which results, in turn, to a more complex configuration.

我的建议是开始使用 kompose 工具，两者都会为您提供yaml与您原始的docker-compose.yml对应的文件，但也会警告您可能出现的问题.

My advise is to start using kompose tool, which both gives you the yaml files corresponding to you original docker-compose.yml but also warn you regarding possible issues that may arise.

按照kompose安装步骤进行操作后，将 orderer.yaml 命名为第一个文件，将 peer.yaml 命名为第二个文件，只需执行

After following kompose installation steps, naming orderer.yaml your first file and peer.yaml your second file it's only a matter of executing

$ kompose convert -f pathToFile/orderer.yaml --volumes
 hostPath
INFO Service name in docker-compose has been changed from "dev_orderer1" to "dev-orderer1"
INFO Network ar2bc is detected at Source, shall be converted to equivalent NetworkPolicy at Destination
INFO Kubernetes file "dev-orderer1-service.yaml" created
INFO Kubernetes file "dev-orderer1-pod.yaml" created
INFO Kubernetes file "ar2bc-networkpolicy.yaml" created

和

$ kompose convert -f pathToFile/peer.yaml --volumes hostPath
INFO Service name in docker-compose has been changed from "dev_couchdb1" to "dev-couchdb1"
INFO Service name in docker-compose has been changed from "dev_peer1" to "dev-peer1"
INFO Service name in docker-compose has been changed from "dev_cli1" to "dev-cli1"
INFO Network ar2bc is detected at Source, shall be converted to equivalent NetworkPolicy at Destination
INFO Network ar2bc is detected at Source, shall be converted to equivalent NetworkPolicy at Destination
INFO Network ar2bc is detected at Source, shall be converted to equivalent NetworkPolicy at Destination
INFO Kubernetes file "dev-couchdb1-service.yaml" created
INFO Kubernetes file "dev-peer1-service.yaml" created
INFO Kubernetes file "dev-cli1-pod.yaml" created
INFO Kubernetes file "ar2bc-networkpolicy.yaml" created
INFO Kubernetes file "dev-couchdb1-pod.yaml" created
INFO Kubernetes file "dev-peer1-pod.yaml" created

您将获得准备部署到kubernetes的新yaml文件

and you get new yaml files ready to deploy to kubernetes

$ ls
ar2bc-networkpolicy.yaml  dev-couchdb1-pod.yaml      dev-orderer1-pod.yaml      dev-peer1-pod.yaml
dev-cli1-pod.yaml         dev-couchdb1-service.yaml  dev-orderer1-service.yaml  dev-peer1-service.yaml

仅显示更多结果，这是生成的peer1 pod的Yaml文件

Just to show a little more the result, this is the generated peer1 pod's yaml file

apiVersion: v1
kind: Pod
metadata:
  annotations:
    kompose.cmd: kompose convert -f peer.yaml --volumes hostPath
    kompose.version: 1.22.0 (955b78124)
  creationTimestamp: null
  labels:
    io.kompose.network/ar2bc: "true"
    io.kompose.service: dev-peer1
  name: dev-peer1
spec:
  containers:
    - args:
        - peer
        - node
        - start
      env:
        - name: CORE_CHAINCODE_EXECUTETIMEOUT
          value: 800s
        - name: CORE_CHAINCODE_STARTUPTIMEOUT
          value: 1200s
        - name: CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS
          value: couchdb1.dept.mycompany.com:5984
        - name: CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD
          value: i5pr1nt_c0uchDB
        - name: CORE_LEDGER_STATE_COUCHDBCONFIG_USERNAME
          value: couchdb
        - name: CORE_LEDGER_STATE_STATEDATABASE
          value: CouchDB
        - name: CORE_PEER_ADDRESS
          value: peer1.dept.mycompany.com:7051
        - name: CORE_PEER_CHAINCODELISTENADDRESS
          value: 0.0.0.0:7052
        - name: CORE_PEER_GOSSIP_BOOTSTRAP
          value: peer2.dept.mycompany.com:8051
        - name: CORE_PEER_GOSSIP_EXTERNALENDPOINT
          value: peer1.dept.mycompany.com:7051
        - name: CORE_PEER_GOSSIP_ORGLEADER
          value: "false"
        - name: CORE_PEER_GOSSIP_USELEADERELECTION
          value: "true"
        - name: CORE_PEER_ID
          value: peer1.dept.mycompany.com
        - name: CORE_PEER_LOCALMSPID
          value: deptMSP
        - name: CORE_PEER_PROFILE_ENABLED
          value: "true"
        - name: CORE_PEER_TLS_CERT_FILE
          value: /etc/hyperledger/fabric/tls/server.crt
        - name: CORE_PEER_TLS_ENABLED
          value: "true"
        - name: CORE_PEER_TLS_KEY_FILE
          value: /etc/hyperledger/fabric/tls/server.key
        - name: CORE_PEER_TLS_ROOTCERT_FILE
          value: /etc/hyperledger/fabric/tls/ca.crt
        - name: CORE_VM_DOCKER_ATTACHSTDOUT
          value: "true"
        - name: CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE
          value: fabric
        - name: CORE_VM_ENDPOINT
          value: unix:///host/var/run/docker.sock
        - name: FABRIC_LOGGING_SPEC
          value: INFO
      image: hyperledger/fabric-peer:latest
      name: dev-peer1
      ports:
        - containerPort: 7051
        - containerPort: 7053
      resources: {}
      volumeMounts:
        - mountPath: /host/var/run/
          name: dev-peer1-hostpath0
        - mountPath: /etc/hyperledger/fabric/msp
          name: dev-peer1-hostpath1
        - mountPath: /etc/hyperledger/fabric/tls
          name: dev-peer1-hostpath2
        - mountPath: /var/hyperledger/production
          name: peer1.dept.mycompany.com
      workingDir: /opt/gopath/src/github.com/hyperledger/fabric/peer
  nodeSelector:
    kubernetes.io/hostname: node1
  restartPolicy: OnFailure
  volumes:
    - hostPath:
        path: /var/run/
      name: dev-peer1-hostpath0
    - hostPath:
        path: /mnt/c/devenv/src/stackoverflow/66982235-hyperledger-kompose/crypto-config/peerOrganizations/dept.mycompany.com/peers/peer1.dept.mycompany.com/msp
      name: dev-peer1-hostpath1
    - hostPath:
        path: /mnt/c/devenv/src/stackoverflow/66982235-hyperledger-kompose/crypto-config/peerOrganizations/dept.mycompany.com/peers/peer1.dept.mycompany.com/tls
      name: dev-peer1-hostpath2
    - hostPath:
        path: /mnt/c/devenv/src/stackoverflow/66982235-hyperledger-kompose
      name: peer1.dept.mycompany.com
status: {}

这是生成的peer1服务的Yaml文件

and this is the generated peer1 service's yaml file

apiVersion: v1
kind: Service
metadata:
  annotations:
    kompose.cmd: kompose convert -f peer.yaml --volumes hostPath
    kompose.version: 1.22.0 (955b78124)
  creationTimestamp: null
  labels:
    io.kompose.service: dev-peer1
  name: dev-peer1
spec:
  ports:
    - name: "7051"
      port: 7051
      targetPort: 7051
    - name: "7053"
      port: 7053
      targetPort: 7053
  selector:
    io.kompose.service: dev-peer1
status:
  loadBalancer: {}

要了解kompose能够为您提供哪种提示，请尝试在不使用-volumes hostPath 选项的情况下运行转换命令，并且会收到相应的警告

To understand which kind of hints kompose is able to give you, please try to run the conversion command without the --volumes hostPath option and you will be given appropriate warnings

$ kompose convert -f pathToFile/orderer.yaml
INFO Service name in docker-compose has been changed from "dev_orderer1" to "dev-orderer1"
WARN Volume mount on the host "/mnt/c/devenv/src/stackoverflow/66982235-hyperledger-kompose/channel-artifacts/genesis.block" isn't supported - ignoring path on the host
WARN Volume mount on the host "/mnt/c/devenv/src/stackoverflow/66982235-hyperledger-kompose/crypto-config/ordererOrganizations/mycompany.com/orderers/orderer1.mycompany.com/msp" isn't supported - ignoring path on the host
WARN Volume mount on the host "/mnt/c/devenv/src/stackoverflow/66982235-hyperledger-kompose/crypto-config/ordererOrganizations/mycompany.com/orderers/orderer1.mycompany.com/tls" isn't supported - ignoring path on the host
INFO Network ar2bc is detected at Source, shall be converted to equivalent NetworkPolicy at Destination
INFO Kubernetes file "dev-orderer1-service.yaml" created
INFO Kubernetes file "dev-orderer1-pod.yaml" created
INFO Kubernetes file "dev-orderer1-claim0-persistentvolumeclaim.yaml" created
INFO Kubernetes file "dev-orderer1-claim1-persistentvolumeclaim.yaml" created
INFO Kubernetes file "dev-orderer1-claim2-persistentvolumeclaim.yaml" created
INFO Kubernetes file "orderer1.mycompany.com-persistentvolumeclaim.yaml" created
INFO Kubernetes file "ar2bc-networkpolicy.yaml" created

转换实际文件后，您可以使用实例化kubernetes对象

After the conversion of your actual files you can instantiate kubernetes object with

$ kubectl apply -f *.yaml

或您需要的任何更合适的命令(严格来说，这与您的问题无关)

or whatever more appropriate command you need (which is not strictly the matter of your question)