Linux netstat命令大全详解

简介

Netstat 命令用于显示各种网络相关信息,如网络连接,路由表,接口状态 (Interface Statistics),masquerade 连接,多播成员 (Multicast Memberships) 等等。

输出信息含义

执行netstat后,其输出结果为

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 2 210.34.6.89:telnet 210.34.6.96:2873 ESTABLISHED
tcp 296 0 210.34.6.89:1165 210.34.6.84:netbios-ssn ESTABLISHED
tcp 0 0 localhost.localdom:9001 localhost.localdom:1162 ESTABLISHED
tcp 0 0 localhost.localdom:1162 localhost.localdom:9001 ESTABLISHED
tcp 0 80 210.34.6.89:1161 210.34.6.10:netbios-ssn CLOSE

Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix 1 [ ] STREAM CONNECTED 16178 @000000dd
unix 1 [ ] STREAM CONNECTED 16176 @000000dc
unix 9 [ ] DGRAM 5292 /dev/log
unix 1 [ ] STREAM CONNECTED 16182 @000000df

从整体上看,netstat的输出结果可以分为两个部分:

一个是Active Internet connections,称为有源TCP连接,其中"Recv-Q"和"Send-Q"指%0A的是接收队列和发送队列。这些数字一般都应该是0。如果不是则表示软件包正在队列中堆积。这种情况只能在非常少的情况见到。

另一个是Active UNIX domain sockets,称为有源Unix域套接口(和网络套接字一样,但是只能用于本机通信,性能可以提高一倍)。

Proto显示连接使用的协议,RefCnt表示连接到本套接口上的进程号,Types显示套接口的类型,State显示套接口当前的状态,Path表示连接到套接口的其它进程使用的路径名。

常见参数

-a (all)显示所有选项,默认不显示LISTEN相关
-t (tcp)仅显示tcp相关选项
-u (udp)仅显示udp相关选项
-n 拒绝显示别名,能显示数字的全部转化成数字。
-l 仅列出有在 Listen (监听) 的服務状态
-p 显示建立相关链接的程序名
-r 显示路由信息,路由表
-e 显示扩展信息,例如uid等
-s 按各个协议进行统计
-c 每隔一个固定时间,执行该netstat命令。

提示:LISTEN和LISTENING的状态只有用-a或者-l才能看到

实用命令实例

1. 列出所有端口 (包括监听和未监听的)

列出所有端口 netstat -a

 # netstat -a | more
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 tcp    0   0 localhost:30037     *:*           LISTEN
 udp    0   0 *:bootpc        *:*
 
Active UNIX domain sockets (servers and established)
 Proto RefCnt Flags    Type    State     I-Node  Path
 unix 2   [ ACC ]   STREAM   LISTENING   6135   /tmp/.X11-unix/X0
 unix 2   [ ACC ]   STREAM   LISTENING   5140   /var/run/acpid.socket

列出所有 tcp 端口 netstat -at

# netstat -at
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 tcp    0   0 localhost:30037     *:*           LISTEN
 tcp    0   0 localhost:ipp      *:*           LISTEN
 tcp    0   0 *:smtp         *:*           LISTEN
 tcp6    0   0 localhost:ipp      [::]:*         LISTEN

列出所有 udp 端口 netstat -au

 # netstat -au
 Active Internet connections (servers and established)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 udp    0   0 *:bootpc        *:*
 udp    0   0 *:49119         *:*
 udp    0   0 *:mdns         *:*

2. 列出所有处于监听状态的 Sockets

只显示监听端口 netstat -l

# netstat -l
 Active Internet connections (only servers)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 tcp    0   0 localhost:ipp      *:*           LISTEN
 tcp6    0   0 localhost:ipp      [::]:*         LISTEN
 udp    0   0 *:49119         *:*

只列出所有监听 tcp 端口 netstat -lt

 # netstat -lt
 Active Internet connections (only servers)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 tcp    0   0 localhost:30037     *:*           LISTEN
 tcp    0   0 *:smtp         *:*           LISTEN
 tcp6    0   0 localhost:ipp      [::]:*         LISTEN

只列出所有监听 udp 端口 netstat -lu

# netstat -lu
 Active Internet connections (only servers)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 udp    0   0 *:49119         *:*
 udp    0   0 *:mdns         *:*

只列出所有监听 UNIX 端口 netstat -lx

 # netstat -lx
 Active UNIX domain sockets (only servers)
 Proto RefCnt Flags    Type    State     I-Node  Path
 unix 2   [ ACC ]   STREAM   LISTENING   6294   private/maildrop
 unix 2   [ ACC ]   STREAM   LISTENING   6203   public/cleanup
 unix 2   [ ACC ]   STREAM   LISTENING   6302   private/ifmail
 unix 2   [ ACC ]   STREAM   LISTENING   6306   private/bsmtp

3. 显示每个协议的统计信息

显示所有端口的统计信息 netstat -s

 # netstat -s
 Ip:
total packets received
with invalid addresses
forwarded
incoming packets discarded
incoming packets delivered
requests sent out
 Icmp:
ICMP messages received
input ICMP message failed.
 Tcp:
active connections openings
failed connection attempts
connection resets received
 Udp:
packets received
packets to unknown port received.
 .....

显示 TCP 或 UDP 端口的统计信息 netstat -st 或 -su

# netstat -st 
# netstat -su

4. 在 netstat 输出中显示 PID 和进程名称 netstat -p

netstat -p 可以与其它开关一起使用,就可以添加 “PID/进程名称” 到 netstat 输出中,这样 debugging 的时候可以很方便的发现特定端口运行的程序。

# netstat -pt
 Active Internet connections (w/o servers)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State    PID/Program name
 tcp    1   0 ramesh-laptop.loc:47212 192.168.185.75:www    CLOSE_WAIT 2109/firefox
 tcp    0   0 ramesh-laptop.loc:52750 lax:www ESTABLISHED 2109/firefox

5. 在 netstat 输出中不显示主机,端口和用户名 (host, port or user)

当你不想让主机,端口和用户名显示,使用 netstat -n。将会使用数字代替那些名称。

同样可以加速输出,因为不用进行比对查询。

# netstat -an

如果只是不想让这三个名称中的一个被显示,使用以下命令

# netsat -a --numeric-ports
# netsat -a --numeric-hosts
# netsat -a --numeric-users

6. 持续输出 netstat 信息

netstat 将每隔一秒输出网络信息。

# netstat -c
 Active Internet connections (w/o servers)
 Proto Recv-Q Send-Q Local Address      Foreign Address     State
 tcp    0   0 ramesh-laptop.loc:36130 101-101-181-225.ama:www ESTABLISHED
 tcp    1   1 ramesh-laptop.loc:52564 101.11.169.230:www   CLOSING
 tcp    0   0 ramesh-laptop.loc:43758 server-101-101-43-2:www ESTABLISHED
 tcp    1   1 ramesh-laptop.loc:42367 101.101.34.101:www   CLOSING
 ^C

 7. 显示系统不支持的地址族 (Address Families)

netstat --verbose

在输出的末尾,会有如下的信息

netstat: no support for `AF IPX' on this system.
netstat: no support for `AF AX25' on this system.
netstat: no support for `AF X25' on this system.
netstat: no support for `AF NETROM' on this system.

8. 显示核心路由信息 netstat -r

# netstat -r
 Kernel IP routing table
 Destination   Gateway     Genmask     Flags  MSS Window irtt Iface
 192.168.1.0   *        255.255.255.0  U     0 0     0 eth2
 link-local   *        255.255.0.0   U     0 0     0 eth2
 default     192.168.1.1   0.0.0.0     UG    0 0     0 eth2

注意: 使用 netstat -rn 显示数字格式,不查询主机名称。

 9. 找出程序运行的端口

并不是所有的进程都能找到,没有权限的会不显示,使用 root 权限查看所有的信息。

# netstat -ap | grep ssh
 tcp    1   0 dev-db:ssh      101.174.100.22:39213    CLOSE_WAIT -
 tcp    1   0 dev-db:ssh      101.174.100.22:57643    CLOSE_WAIT -

找出运行在指定端口的进程

# netstat -an | grep ':80'

10. 显示网络接口列表

# netstat -i
 Kernel Interface table
 Iface  MTU Met  RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP TX-OVR Flg
 eth0    1500 0     0   0   0 0       0   0   0   0 BMU
 eth2    1500 0   26196   0   0 0     26883   6   0   0 BMRU
 lo    16436 0     4   0   0 0       4   0   0   0 LRU

显示详细信息,像是 ifconfig 使用 netstat -ie:

# netstat -ie
 Kernel Interface table
 eth0   Link encap:Ethernet HWaddr 00:10:40:11:11:11
 UP BROADCAST MULTICAST MTU:1500 Metric:1
 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
 collisions:0 txqueuelen:1000
 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
 Memory:f6ae0000-f6b00000

11. IP和TCP分析

查看连接某服务端口最多的的IP地址

wss8848@ubuntu:~$ netstat -nat | grep "192.168.1.15:22" |awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -20
221.136.168.36
154.74.45.242
78.173.31.236
62.183.207.98
192.168.1.14
182.48.111.215
124.193.219.34
119.145.41.2
114.255.41.30
75.102.11.99

TCP各种状态列表

wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'
established)
Foreign
LISTEN
TIME_WAIT
ESTABLISHED
TIME_WAIT
SYN_SENT

先把状态全都取出来,然后使用uniq -c统计,之后再进行排序。

wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'|sort|uniq -c
ESTABLISHED
FIN_WAIT1
Foreign
LAST_ACK
LISTEN
SYN_SENT
TIME_WAIT
established)

最后的命令如下:

netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn

分析access.log获得访问前10位的ip地址

awk '{print $1}' access.log |sort|uniq -c|sort -nr|head -10

以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持。